Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The product contains an excessive amount of bis(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP) and diisononyl phthalate (DINP) (measured values: 1,849 mg/kg, 1,200 mg/kg and 1,200 mg/kg, respectively). These phthalates may harm the health of children by causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
The toy contains a small part (a metal ring). A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The adaptor has an earthed socket, but it uses a two-pin plug and has no protective conductor. This means a class I appliance can be connected without proper earthing. If a fault occurs, the connected appliance could become live, and the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1
The toy contains a small part (a metal ring). A small child may put it in the mouth and choke The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains formaldehyde (measured value up to 152 mg/kg). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with the REACH Regulation.
The adaptor has an earthed socket, but it uses a two-pin plug and has no protective conductor. This means a class I appliance can be connected without proper earthing. If a fault occurs, the connected appliance could become live, and the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1
The toy has small parts (the eyes) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The adaptor has an earthed socket, but it uses a two-pin plug and has no protective conductor. This means a class I appliance can be connected without proper earthing. If a fault occurs, the connected appliance could become live, and the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62368-1
The toy has small parts (eyes) that can easily detach. Furthermore, the fibrous stuffing material of the toy is easily accessible. A small child could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The plug of the product does not meet the dimensional requirements and may not make a secure connection with the socket. It is also fitted with a counterfeit fuse. This could lead to the plug overheating and/or exploding. The product does not comply with the requirements of the Low Voltage Directive
The toy contains small parts (cover of the cylinder) that can easily detach. As a consequence, a small child may put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 71-1.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The mains plug of the product does not meet the dimensional requirements. The socket shutters can get stuck in an open position, and the user could receive an electric shock from accessible live parts. There is insufficient creepage and clearance distance between circuits, and it does not meet required insulation requirements. This can lead to the user receiving an electric shock from accessible live parts. The product does not comply with the Low Voltage Directive.
The wires of the product are soldered directly to the circuit board without proper support, so vibrations or shocks could loosen the battery’s thermal protection, causing overheating and a fire. Also, the plug does not meet the required dimensions and may not fit securely in a socket, which could also lead to overheating and fire. The product does not comply with the requirements of the Machinery Directive.
The product has an excessive concentration of cadmium (measured value up to 92% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. This product does not comply with the REACH Regulation.
The product lacks instructions, which could lead to a child not being properly secured in the baby carrier, with the risk of falling as a result of incorrect positioning of the child or incorrect adjustment of the product. The product does not comply with the General Product Safety Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The textile label on the product contains chromium VI (measured value: 0.12 mg/kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with the requirements of the Toy Safety Directive or with the European standard EN 62115.
The migration of boron from the toy slime is too high (measured value up to 1314 mg/kg). Ingestion or contact with an excessive quantity of boron may harm the health of children by damaging their reproductive system The product does not comply with the requirements of the Toy Safety Directive nor the European standard EN 71-3.