Louisville Ladder recalls attic stairway ladders due to fall hazard
Fall hazard: CPSC states the gas strut can detach, causing the attic stairway ladder to collapse and posing a risk of serious injury or death.
Official monitoring feed
Filter the immutable release projection from CPSC and NHTSA. Each result leads to an official action with source, date, remedy and licence context.
Filtered feed
Fall hazard: CPSC states the gas strut can detach, causing the attic stairway ladder to collapse and posing a risk of serious injury or death.
Shock and electrocution hazards: CPSC states the recalled COMMOWNER electric pressure washers pose a serious risk of injury or death.
Some 2026 model-year Jeep Wrangler vehicles (and related Gladiator coverage in the same NHTSA campaign) may have been built with a steel wheel produced with a thin wall condition that can fail.
NHTSA campaign 26V393 states the high-voltage battery ECU may experience a fault, resulting in a loss of drive power.
NHTSA campaign 26V096 states the air-conditioning electrical wiring harness may be damaged and short-circuit, increasing the risk of a fire.
The rear brake caliper can crack or break, reducing the brake system’s effectiveness posing a risk of serious injury or death due to crash hazard.
The ventilation fan motor in the heat pumps can short circuit if water gets on the circuit board, causing the units to overheat and posing a fire hazard.
The recalled power station’s circuit board can overheat, posing a risk of serious injury from fire and burn hazards.
The LED Tea Lights violate the mandatory safety standard for consumer products with button cell and coin batteries because the button batteries can be accessed easily by children, posing an ingestion hazard. Additionally, the packaging and product do not have the warnings required under https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN">Reese’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.
The recalled mattresses violate the mandatory flammability standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">mattresses, posing a risk of serious injury or death from fire.
The recalled pressure washers lack an integral ground-fault circuit-interrupter (GFCI) and an adequate-length power cord, posing serious risks of injury or death from shock and electrocution hazards.
The recalled hockey visors and replacement visor accessories can crack upon impact, posing a risk of injury due to laceration or impact hazards.
An overheated printed circuit board increases the risk of a fire.
A loss of throttle control increases the risk of a crash.
A loss of exterior lights can reduce the visibility of the vehicle to other drivers, increasing the risk of a crash. Inoperative equipment can delay emergency response, increasing the risk of injury.
The recalled minifridges’ electrical switch can short circuit, posing fire and burn hazards.
The recalled magnetic building cubes contain magnets that can become loose if the cubes break or open, posing a magnet ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.
Use of the fire pits can result in uncontrolled pool fires where flames burn across the surface of pooled or spilled alcohol, as well as flame jetting from fuel containers, resulting in serious or fatal burns.
The baby jumper, baby swing and 2-in-1 baby jumper & swing can become unstable, posing fall and impact hazards. Additionally, the hanging restraint straps and seat openings can pose strangulation hazards.
The recalled toys violate the https://cpsc.gov/Business--Manufacturing/Business-Education/Business-Gu… lang="EN-US">small parts ban because they are intended for children under three years old and the wooden beads pose a deadly choking hazard to young children.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The recalled fuel containers violate the requirement for closures under the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">Children’s Gasoline Burn Prevention Act. The closure is not child-resistant, posing a risk of burns and poisoning to children.
The recalled youth ATVs violate the mandatory safety standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">ATVs because the parking brakes fail to hold and the ATV’s speed limiting device is not set to the restricted speed required for children ages six (6) and older, posing a crash hazard. Additionally, the ATVs are missing the required rear safety reflectors, reducing visibility of the youth ATV to other vehicles, posing a deadly crash hazard.
During assembly or disassembly, the frame of the wall bed can fall onto consumers, posing deadly impact, crush and laceration hazards.
The recalled mattresses violate the mandatory flammability standard for https://cpsc.gov/Business--Manufacturing/Business-Education/Business-Gu… lang="EN-US">mattresses, posing a risk of serious injury or death from fire.
The alloy insert located in the front crown hole of the carbon fork can come loose, causing an accessory to fall off and land on the bike's front wheel, posing a risk of serious injury or death from a fall and crash hazard.
The recalled sound maker violates the mandatory safety standard for consumer products with button cell and coin batteries because the lithium coin batteries can be accessed easily by children, posing an ingestion hazard. Additionally, the packaging and product do not have the warnings required under https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN">Reese’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns, and death.
The recalled magnetic cubes violate the https://www.ecfr.gov/current/title-16/chapter-II/subchapter-B/part-1250… lang="EN-US">mandatory standard for toys because the cubes were packaged with loose high-powered magnets, posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.
The recalled pressure washers lack an integral ground-fault circuit-interrupter (GFCI) and, because the power cord is short, it may encourage use of an extension cord, posing serious risks of injury or death from shock and electrocution hazards.
The fuel containers violate the requirement for closures under the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">Children’s Gasoline Burn Prevention Act because the closure is not child-resistant, posing a risk of burns and poisoning to children.
The pre-filled fuel containers violate the mandatory safety standards of the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">Portable Fuel Container Safety Act because they lack flame mitigation devices, posing a deadly risk of flash fire and burn hazard.
The fan blades can separate from the fan motor flywheel, posing impact and injury hazards to consumers.
An incorrect suspension knuckle may not perform as expected, possibly resulting in a loss of vehicle handling and control, increasing the risk of a crash.
A damaged rear spoiler may detach and create a road hazard, increasing the risk of a crash.
Windshield wiper failure can reduce visibility, increasing the risk of a crash.
Driving with underinflated tires can increase the risk of a crash.
Engine failure can result in a loss of drive power, increasing the risk of a crash. In addition, bearing failure may cause a breach in the engine block, allowing oil to leak, increasing the risk of a fire.
Marker lights that fail to illuminate can reduce visibility, increasing the risk of a crash.
Marker lights that fail to illuminate can reduce visibility, increasing the risk of a crash.
Battery failure can also increase the risk of a fire.
An incorrectly attached steering spindle can lead to a loss of steering control, increasing the risk of a crash.
An unexpected loss of drive power can increase the risk of a crash. In addition, a damaged driveshaft can result in a vehicle rollaway if the parking brake is not applied, increasing the risk of a crash or injury.
Air bags that do not deploy as intended increase the risk of injury in a crash.
An electrical short can cause a disruption to safety functions such as a loss of rear lighting or instrument panel warning lights, increasing the risk of a crash.
An electrical short can cause a disruption to safety functions such as a loss of rear lighting or instrument panel warning lights, increasing the risk of a crash.
A loss of exterior lights can reduce the visibility of the vehicle to other drivers, increasing the risk of a crash. Inoperative equipment can delay emergency response, increasing the risk of injury.
During a crash, an incompatible fuel tank cage and fuel system may result in a fuel leak, increasing the risk of a fire.
During a crash, an incompatible fuel tank cage and fuel system may result in a fuel leak, increasing the risk of a fire.
The recalled mowers violate the mandatory safety standard for walk-behind power lawn mowers because the blades can operate without the blade control system engaged or continue to operate even after the release of the control, posing a serious laceration hazard.
The recalled headbands violate the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Toy-Saf… lang="EN-US">mandatory safety standard for toys with button cell and coin batteries because the lithium coin batteries can be accessed easily by children, posing an ingestion hazard. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns, and death.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The magnetic fidget sliders violate https://www.ecfr.gov/current/title-16/chapter-II/subchapter-B/part-1250… lang="EN-US">the mandatory standard for toys because they can liberate loose magnets posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other or other metal objects and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.
The recalled infant walkers violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">infant walkers because they can fit through a standard doorway and fail to stop at the edge of a step, posing a deadly fall hazard. In addition, the infant walkers have leg openings that allow the child to slip down until the child's head can become entrapped, posing a risk of serious injury or death.
The magnetic fidget sliders violate https://www.ecfr.gov/current/title-16/chapter-II/subchapter-B/part-1250… lang="EN-US">the mandatory standard for toys because they can liberate loose high-powered magnets posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other or other metal objects and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.
The recalled bed rails violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. In addition, the bed rails do not bear the required hazard warning labels.
The recalled mattresses violate the mandatory safety standard for https://www.federalregister.gov/documents/2022/02/15/2022-02414/safety-… lang="EN-US">crib mattresses because the mattresses may not adequately fit certain play yards, posing a deadly entrapment hazard. Babies can suffocate in gaps between an undersized mattress, or extra padding, and side walls of a product, especially when the infant’s face becomes trapped against the side and the mattress, preventing the infant from breathing. Furthermore, the full-sized crib mattresses violate the mandatory flammability standard for mattress sets, posing a risk of serious injury or death from fire.
The recalled battery chargers violate the mandatory standard for consumer products containing button cell or coin batteries, because the charger has lithium coin batteries that can be accessed easily by children. In addition, the coin batteries provided with the battery charger are not in child-resistant packaging, and the packaging does not have the warnings, as required by https://www.cpsc.gov/Newsroom/News-Releases/2023/Making-Families-Safer-… lang="EN-US">Reese’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.
The recalled teething toys violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Toy-Saf… lang="EN-US">toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of children’s throat and become lodged, posing a serious risk of respiratory distress and a deadly choking hazard.
The recalled LED finger lights violate the https://cpsc.gov/Business--Manufacturing/Business-Education/Toy-Safety"… lang="EN-US">mandatory safety standard for toys because they contain button cell batteries that can be easily accessed by children. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns, and death.
The Mini Laser Pointer Keychains violate the mandatory safety standard for consumer products with button cell and coin batteries because the button batteries can be accessed easily by children, posing an ingestion hazard. Additionally, the packaging and product do not have the warnings required under https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN">Reese’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.
The recalled recreational off highway vehicle can maintain speed or accelerate when the accelerator pedal is released, posing a risk of serious injury or death from a crash hazard.
The spliced termination ends on the recalled ropes can fail unexpectedly, posing a risk of serious injury or death from fall hazard.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the https://protect.hec.checkpoint-gov.com/v2/r08/___https:/www.cpsc.gov/Bu… lang="EN-US">STURDY Act.
The recalled second stage regulators can restrict air flow to the user at depths exceeding 45 meters (approximately 147 feet), posing risk of serious injury or death from a drowning hazard.
A child seat that is not reclined as intended increases the risk of injury in a crash.
A seat belt that does not retract properly may fail to restrain an occupant as intended, increasing the risk of injury.
A loose steering gearbox can result in a loss of steering, increasing the risk of a crash.
A seat belt that does not retract may fail to restrain properly an occupant as intended, increasing the risk of injury.
An instrument cluster that fails to display critical safety information increases the risk of a crash or injury.
Driving with a disabled electronic stability control system or continuously illuminated brake lights can increase the risk of a crash.
Marker lights that fail to illuminate can reduce visibility, increasing the risk of a crash.
An oil reservoir that detaches can create a road hazard, increasing the risk of a crash.
Marker lights that fail to illuminate can reduce visibility, increasing the risk of a crash.
Inoperative windshield wipers can reduce the driver's visibility, increasing the risk of a crash.
A liftgate that falls unexpectedly increases the risk of injury.
Activation of the jacks during transit increases the risk of a crash.
Turn signals that do not function properly increase the risk of a crash.
The accumulation of exhaust fumes increases the risk of injury or death from carbon monoxide poisoning.
An unlabeled ABS light may confuse following drivers, increasing the risk of a crash.
Headlight low beams that are too bright can reduce visibility for oncoming drivers, increasing the risk of a crash.
Insufficient low beam headlight illumination can reduce driver visibility, increasing the risk of a crash.
A unprotected power feed wire increases the risk of a fire.
A loss of exterior lights can reduce the visibility of the vehicle to other drivers, increasing the risk of a crash. Inoperative equipment can delay emergency response, increasing the risk of injury.
A dangling or completely disengaged solar panel may hit other vehicles or pedestrians, increasing the risk of a crash or injury.
The zipline kit’s steel cable, turnbuckle and seat can detach or break during use, posing a fall hazard. The zipline spring brakes are not stiff enough to safely slow a rider down and the kit design does not include an emergency brake, posing collision and fall hazards.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The recalled projectors’ lithium-ion battery can overheat, posing a risk of serious injury or death from fire and burn hazards.
The recalled refrigerators’ internal electrical components can short circuit and ignite, posing a risk of serious injury or death from fire and burn hazards.
The cups and containers violate the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… standard for consumer products with button cell and coin batteries because they contain button cell batteries that can be accessed easily by children, posing an ingestion hazard. In addition, the products do not bear the warning labels required by https://www.cpsc.gov/Newsroom/News-Releases/2023/Making-Families-Safer-…’s Law. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns, and death.
The recalled tower stools can collapse or tip over while in use, and a child’s torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.
The electrical cord on the recalled throws and blankets can detach and ignite, posing a risk of serious injury or death from fire, burn and shock hazards.
The recalled fireworks rockets can explode prematurely before reaching their intended height, posing explosion and burn hazards.
The recalled dive sticks violate the federal https://www.cpsc.gov/FAQ/Dive-Sticks">dive sticks ban because they exceeded the compress limit, posing an impalement hazard. In shallow water, children may fall or land on a dive stick, resulting in serious piercing injuries. Facial and eye injuries are also possible when children attempt to retrieve the sticks underwater.
The recalled tower stools can collapse or tip over while in use, and a child’s torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.
The recalled doll playsets violate the https://cpsc.gov/Business--Manufacturing/Business-Education/Business-Gu… lang="EN-US">small parts ban because the toys are for children under three years old and some of the accessories are small parts, posing a deadly choking hazard.
The recalled baby loungers violate the mandatory safety standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">infant support cushions because the padding can obstruct an infant’s breathing, posing a serious risk of injury or deadly suffocation hazard.
The recalled tower stools can collapse or tip over while in use, and a child’s torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.
The lithium-ion battery in the recalled hand warmers can overheat and ignite, posing a risk of serious injury or death from fire and burn hazards.
A loose component may move and damage the high voltage battery, increasing the risk of a fire.
An improperly installed seat belt buckle anchor may fail to properly restrain occupants, increasing the risk of injury during a crash.
A cracked wheel may lead to disc separation and a loss of control, increasing the risk of a crash.
A fuel leak in the presence of an ignition source increases the risk of a fire.
People in an enclosed space, such as a garage, with a running generator may be at an increased risk of injury or death from carbon monoxide poisoning.
The ladder may detach during use, increasing the risk of injury.
A detached screw may lodge between the frame and stem, interfering with steering and increasing the risk of a crash or injury.
A separated ABS ECU may become damaged, causing the ABS system to fail and increasing the risk of a crash.
Improper air bag deployment can increase the risk of injury during a crash.
Improper air bag deployment can increase the risk of injury during a crash.
An misfire or loss of drive power increases the risk of a crash.
Detached trim pieces can create a road hazard, increasing the risk of a crash.
A cracked base may result in a loss of air pressure and suspension support, increasing the risk of a crash.
An obstructed rearview camera image can reduce the driver's rear visibility, increasing the risk of a crash.
Contact with wiring may cause a short circuit or an electrical arc, increasing the risk of a fire.
Incorrect tire pressure information can result in over inflated tires, increasing the risk of tire failure and a crash.
An overheated conductor may increase the risk of a fire.
Incorrect information may result in the wrong sized replacement tires being installed, increasing the risk of a crash.
Brake lights that remain on may fail to alert other vehicles of the driver's intention, increasing the risk of a crash.
A loss of lighting, windshield wipers, ABS function, or a loss of drive power can increase the risk of a crash.
Brake lights that remain on may fail to alert other vehicles of the driver's intention, increasing the risk of a crash.
The rear spring hanger may detach from the frame, increasing the risk of a crash.
A detached trailer increases the risk of a crash.
A vehicle rollaway increases the risk of a crash or injury.
An unsecured wheelchair can move during transit, increasing the risk of injury.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risk of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The recalled teething toys violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Toy-Saf… lang="EN-US">toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of children’s throat and become lodged, posing a serious risk of respiratory distress and deadly choking hazard.
The recalled drain covers violate the entrapment protection standards of the https://www.cpsc.gov/Business--Manufacturing/Business-Education/FAQ?p=3… lang="EN-US">Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing deadly entrapment and drowning hazards to consumers.
The recalled drain covers violate the entrapment protection standards of the https://www.cpsc.gov/Business--Manufacturing/Business-Education/FAQ?p=3… lang="EN-US">Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing deadly entrapment and drowning hazards to consumers.
The recalled teething toy sets contain a pull string teething toy that violates the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Toy-Saf… lang="EN-US">toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of a child’s throat and become lodged, posing a risk of respiratory distress and a deadly choking hazard.
The snap can detach from the recalled bibs and stroller bags, posing a risk of serious injury or death from a choking hazard to young children.
A fuel leak in the presence of an ignition source increases the risk of a fire. In addition, pieces of the O-ring may clog the fuel lines, causing a loss of engine performance and increasing the risk of a crash.
Incorrect water tank capacity information can allow the vehicle to be overloaded and increase the risk of a crash.
An overheated printed circuit board increases the risk of a fire.
An engine stall or failure of electrical systems such as the instrument display or ABS, increases the risk of a crash.
A cracked weld may result in the collapse of the crane column when in use, increasing the risk of injury to the operator or others nearby.
A winch that operates unintentionally may increase the risk of injury.
A wheelchair lift that continues to move while occupied increases the risk of injury.
A rearview camera that fails to display an image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.
Electrical component failure may lead to an unexpected vehicle shutdown, increasing the risk of a crash. In addition, an electrical short increases the risk of a fire.
Insufficient low beam headlight illumination can reduce driver visibility, increasing the risk of a crash.
An incorrect VIN on the label can make it difficult for owners to recognize that their vehicle is involved in a safety recall, increasing the risk of crash or injury.
Unexpected movement of the driver’s seat back may trap a second-row occupant, increasing the risk of injury.
A brake fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire. Additionally, a brake fluid leak can extend the distance required to stop, increasing the risk of a crash.
A brake fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire. Additionally, a brake fluid leak can extend the distance required to stop, increasing the risk of a crash.
A short circuit in the engine compartment can create heat or spark, increasing the risk of a fire.
A headrest that shifts unexpectedly may increase the risk of injury in a crash.
A wheelchair lift that continues to move while occupied increases the risk of injury.
A fastener that has not been heat treated could fail, resulting in separation of the pedestal and turntable, increasing the risk of injury.
An overheated printed circuit board increases the risk of a fire.
A rear impact guard that is not properly installed can increase the risk of injury during a crash.
The recalled finger lights violate the https://cpsc.gov/Business--Manufacturing/Business-Education/Toy-Safety"… lang="EN-US">mandatory safety standard for toys because they contain button cell batteries that can be easily accessed by children. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns, and death.
The power cord insulation can be insufficient due to a protective fiberglass sleeve not covering it adequately, posing a risk of shock and/or fire hazard.
The paint thinner contains low-viscosity petroleum distillates, which must be in child-resistant packaging, as required by the https://protect.hec.checkpoint-gov.com/v2/r08/___https://www.cpsc.gov/B… lang="EN-US">Poison Prevention Packaging Act. The bottles are not child-resistant, posing a risk of serious injury or death from poisoning if the contents are swallowed by young children. Additionally, petroleum distillates can get into the lungs, causing chemical pneumonia and/or pulmonary damage, which can be fatal.
The recalled toddler towers can tip over while in use, posing a risk of serious injury and death, due to tip over and fall hazards.
The recalled chandeliers lack proper electrical grounding, posing a risk of serious injury or death from electrocution hazard.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The cup in the lunch boxes contains high lead concentration levels for drinking vessels, posing a lead poisoning hazard. Lead is toxic if ingested by adults or children and can cause adverse health issues.
The regulator inlet tube can crack and break, posing a risk of serious injury or death from drowning.
The recalled sweaters violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">clothing textiles, posing a risk of serious burn injuries or death.
The lighters violate the mandatory safety standard for multipurpose https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">lighters because they do not have the required child-resistant mechanisms posing a risk of serious injury or death from fire and burn hazards. In addition, the lighters failed to meet the pre-market lighter submission requirement needed to demonstrate that the lighters feature child-resistant mechanisms and ensuring their safety and compliance with U.S. regulations.
The recalled bed rails violate the mandatory standard for https://protect.hec.checkpoint-gov.com/v2/r08/___https:/www.cpsc.gov/Bu… lang="EN-US">adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. In addition, the bed rails do not bear the required hazard warning labels.
The recalled tower stools can collapse or tip over while in use, and a child’s torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.
The sandals’ decorative pearls can fall off, posing a risk of serious injury or death from a choking hazard.
The recalled bed rails violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. Additionally, the bed rails’ push pins and push pin holes are incorrectly sized, posing a laceration hazard.
An overheated wire can ignite flammable material in the cargo area, increasing the risk of fire.
A rearview camera image that does not display can decrease the driver's visibility, increasing the risk of a crash.
A short circuit increases the risk of a fire.
The body panels may separate during a crash, reducing structural integrity and increasing the risk of injury.
The body panels may separate during a crash, reducing structural integrity and increasing the risk of injury.
A detached rail can cause a loss of control, increasing the risk of injury.
Loss of power to the rear wheels can prevent the vehicle from moving, increasing the risk of a crash.
An overloaded vehicle can increase the risk of a crash.
A loss of trailer brakes or lights can reduce the driver’s ability to control the trailer and decrease the trailers visibility to other road users, increasing the risk of a crash.
A detached roof rail cover can create a road hazard, increasing the risk of a crash.
A liftgate that falls unexpectedly increases the risk of injury.
An overheated printed circuit board increases the risk of a fire.
A seat that moves unexpectedly may not properly restrain an occupant during a crash, increasing the risk of injury.
A seat belt buckle that fails to properly restrain an occupant in a crash increases the risk of injury.
Failing to respond to low visibility conditions can increase the risk of a crash or impede first responders.
A loss of steering increases the risk of a crash.
An overheated printed circuit board increases the risk of a fire.
The tempered glass window in the pizza oven can shatter during use, posing a risk of serious injury from laceration hazard.
The recalled ranges’ front-mounted knobs can be activated accidentally by humans or pets, posing a risk of serious injury from a fire hazard.
The biometric lock on the gun safes can be opened by unauthorized users, posing a serious injury hazard and risk of death.
The recalled bed rails violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. In addition, the bed rails do not bear the required hazard warning labels.
The recalled infant walkers violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">infant walkers because they can fit through a standard doorway and fail to stop at the edge of a step, posing a risk of serious injury or death due to a fall hazard.
The lithium-ion battery in the recalled power banks (chargers) can overheat and ignite, posing a risk of serious injury or death from fire and burn hazards.
Charging the lithium-ion batteries through the USB-C port while the batteries are inserted in the yard power tools can cause the batteries to short-circuit, posing a risk of serious injury from fire hazard.
A loose steering arm can result in a loss of vehicle steering control, increasing the risk of a crash.
A broken rear axle carrier can cause a sudden loss of vehicle stability and control, increasing the risk of a crash.
Fire increases the risk of injury.
Referencing the incorrect GVWR may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
An electrical short increases the risk of a fire.
A short circuit in the starter relay may increase the risk of a fire.
An incorrectly installed quick release valve that does not function properly can increase the risk of a crash.
Cracks or breaks in the rear brake caliper can reduce braking ability, increasing the risk of a crash.
Improper illumination from the towing lights can reduce trailer visibility to other drivers, increasing the risk of a crash.
A fuel leak increases the risk of fire.
Steps that detach while in use increase the risk of injury. Additionally, steps that detach while in transit increase the risk of a crash.
An incorrect GAWR label may lead to an overloaded vehicle, increasing the risk of a crash.
A noncompliant vehicle may have reduced occupant protections, increasing the risk of injury during a crash.
An unsecured wheelchair can move during transit, increasing the risk of injury.
An incorrect load carrying capacity modification label may lead to improper loading of the vehicle, increasing the risk of a crash.
The recalled baby loungers violate the mandatory safety standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">infant sleep products. The sides are too low to contain an infant and the enclosed openings at the foot of the loungers are wider than allowed, posing serious risks of fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury.
The recalled drain ports with covers violate the entrapment protection standards of the https://www.cpsc.gov/Business--Manufacturing/Business-Education/FAQ?p=3… lang="EN-US">Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing deadly entrapment and drowning hazards to consumers.
The recalled medicated wipes contain lidocaine, which must be in child-resistant packaging, as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">Poison Prevention Packaging Act. The packaging of the wipes is not child-resistant, posing a risk of serious injury or death from poisoning if the contents of the wipes are ingested by young children.
The recalled LED finger lights violate the https://cpsc.gov/Business--Manufacturing/Business-Education/Toy-Safety"… lang="EN-US">mandatory safety standard for toys because they contain button cell batteries that can be easily accessed by children. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns, and death.
The recalled lithium-ion battery in the vacuum cleaner can overheat and ignite, posing a risk of serious injury from fire and burn hazards.
The recalled nursing pillows advertised for infant feeding and tummy time violate the mandatory safety standards for https://protect.hec.checkpoint-gov.com/v2/r08/___https://www.cpsc.gov/B… lang="EN-US">nursing pillows and https://protect.hec.checkpoint-gov.com/v2/r08/___https://www.cpsc.gov/B… lang="EN-US">infant support cushions because they can obstruct an infant’s breathing, posing a serious risk of injury or death from suffocation.
The clear plastic dome can detach from the blue plastic base, making the small plastic balls inside the toy accessible to children, posing a choking hazard.
The LED’s board can overheat or come into contact with the lens or nearby combustible materials, posing a fire hazard.
The lithium coin batteries are not sold in child-resistant packaging and do not bear the warning labels as required under https://protect.hec.checkpoint-gov.com/v2/r08/___https://www.cpsc.gov/N… lang="EN-US">Reese’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns and death.
Small metal wire bristles can detach from the brushes and stick to the grill or food, posing an ingestion hazard and risk of serious internal injuries that could require surgery.
The recalled fireworks can tip over, posing a risk of serious injury from explosion and burn hazards.
The recalled fireworks can malfunction, and shots can blow out the side of the tube, posing a risk of serious injury from explosion and burn hazards.
A winch that operates unintentionally may increase the risk of injury.
The electrical system may overheat without a ground, increasing the risk of a fire. There is also an increased risk of injury from electrical shock.
The electrical system may overheat without a ground, increasing the risk of a fire. There is also an increased risk of injury from electrical shock.
A fuel leak increases the risk of a fire.
A short may cause the inverter AC wiring to overheat, increasing the risk of a fire.
A fire increases the risk of injury.
A fire increases the risk of injury.
A fire increases the risk of injury.
Parking lights and daytime running lights that fail to illuminate properly reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
Parking lights and daytime running lights that fail to illuminate properly reduce the vehicle's visibility to other drivers, increasing the risk of a crash.
A loss of power brake assist can extend the distance required to stop the vehicle. Additionally, malfunctioning ABS and/or DSC systems can cause a loss of vehicle control. Either of these scenarios can increase the risk of a crash.
A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Loose rear subframe bolts can lead to a loss of vehicle stability or rear subframe detachment, increasing the risk of a crash or injury.
An improperly secured child restraint system may not restrain an occupant as intended, increasing the risk of injury during a crash.
An instrument panel display that does not show critical information, such as gear selection, increases the risk of a crash.
A missing gear selection indicator may lead to unintended vehicle movement or a vehicle rollaway, increasing the risk of a crash.
A loss of electronic stability control and/or electronic brake assist increases the risk of a crash.
A vehicle that does not produce a warning sound may fail to alert pedestrians of an approaching vehicle, increasing the risk of injury.
A dinette that moves during transit may increase the risk of injury.
Differential pinion shaft fracture may result in a loss of drive power, or unintended vehicle movement if the vehicle is in park without the parking brake applied, increasing the risk of a crash.
Windshield wipers or a washing system that fails to function as intended can reduce visibility, increasing the risk of a crash.
A missing gear selection indicator may lead to unintended vehicle movement or a vehicle rollaway, increasing the risk of a crash.
A vehicle that does not make a sound may fail to alert pedestrians of an approaching vehicle, increasing the risk of a crash or injury.
Referencing incorrect weight information may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
An overheated printed circuit board increases the risk of a fire.
An unsecured wheelchair can move during transit, increasing the risk of injury.
A door that fails to open or close increases the risk of injury to occupants in a crash.
A door that fails to open or close increases the risk of injury to occupants in a crash.
While using the pole rack at full capacity, an incorrect high vertical center of gravity during braking and cornering may lead to a loss of vehicle control, increasing the risk of a crash.
An unexpected loss of drive power can increase the risk of a crash. In addition, a driveshaft that is not fully engaged can result in a vehicle rollaway if the parking brake is not applied, increasing the risk of a crash or injury.
The recalled children’s loungewear sets violate the mandatory flammability standards for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">children’s sleepwear, posing a risk of serious burn injuries.
The recalled youth ATVs violate the mandatory safety standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">ATVs because they are missing brake lights, reducing visibility of the youth ATV to other vehicles, posing a deadly crash hazard.
The solar power bank’s lithium-ion battery can swell and overheat, posing a burn hazard to consumers.
The roll-on warmers’ power cord can overheat and short circuit, posing a risk of serious injury or death from fire, burn and electrical shock hazards.
Showing the first 250 newest matches. Narrow the search to inspect a specific product, manufacturer or campaign.
Portfolio monitoring
RecallCheck is developing paid, source-backed monitoring for organisations that need repeatable checks and evidence exports.