Jayco, Inc. recall 26V555: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
The incorrect warning light may fail to alert the driver to critical safety information or cause confusion, increasing the risk of a crash.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The incorrect warning light may fail to alert the driver to critical safety information or cause confusion, increasing the risk of a crash.
A wheelchair lift that continues to move while occupied increases the risk of injury.
LP tanks that cannot be shut off increase the risk of a fire. Additionally a loose LP tank may detach and become a road hazard, increasing the risk of a crash.
A lateral link separation could shift the wheel alignment, causing a loss of vehicle control and increasing the risk of a crash.
Referencing the incorrect weight could result in the trailer being overloaded, increasing the risk of a crash.
A detached winch may increase the risk of injury to people near the trailer.
The product has an excessive concentration of cadmium (measured value: 0.014% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The ear muffs have not undergone the required conformity tests for personal protective equipment category III. When the product is used in direct danger area, there is a risk of suffering irreversible hearing loss. This product does not comply with Personal Protective Equipment (PPE) Regulation.
The solders in the product have an excessive concentration of lead (measured value: 47 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 1.3 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The solders in the product have an excessive concentration of cadmium and lead. (measured values up to 0.08% and 50% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The circuit braker is not sensitive enough and can get stuck in the open position. Moreover the polyethylene plate of the device can melt. This can lead to a user coming into contact with live parts and receiving an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60898.
The solders in the product have an excessive concentration of lead (measured value up to 95% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Commission Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The plug face does not meet dimensional requirements. This may result in the user receiving an electric shock when removing or inserting the plug from the socket. Additionally, the adaptor has poor internal construction with wires soldered directly to the Printed Circuit Board with no mechanical fixing. The user can touch the accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The build quality of the product is insufficient. Live parts are accessible. Users may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The ball joints on the steering rods may have insufficient hardness, which could cause them to break. This may affect vehicle handling and increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product contains the active substance cloprostenol isopropyl ester (measured value up to 0.003 mg/kg), which should be used under supervision of an ophthalmologist. Cloprostenol isopropyl ester is a prostaglandin analogue, which could cause eye and ophthalmic defects in the user and should not be used by pregnant and breastfeeding women, as it may affect the child. The product does not comply with the Cosmetic Products Regulation.
The fireworks may burst or release burning material outside the safety distance of 8 m or below a height of 3 m, causing burns. Moreover, the product is not stable and may shoot in the wrong direction causing burns and injuries.Additionally, the article may explode during functioning, leading to a risk that consumers may be hit by pyrotechnic effects that could cause burn injuries and, in the worst case, eye injuries.Furthermore, the article may not function fully. A person may find non-fired parts and try to re-ignite these with the risk of being hit by the pyrotechnic effects from the article. Moreover, the article does not extinguish after functioning within 120 seconds, which may cause fire to surrounding objects. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 24.7% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. Moreover, the plastic of the product has an excessive concentration of polycyclic aromatic hydrocarbons (PAHs)(total measured value 7.35 mg/kg). These PAHs may cause cancer. The product does not comply with the REACH Regulation.
The power supply box is fragile and unsealed. The user could therefore touch accessible live parts such as the exposed printed circuit board and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1.
The battery management system lacks a cell temperature monitoring device. During charging, the battery can overheat, explode, and catch fire. This could spread to surrounding materials and cause severe burn injuries to the user. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
The toy's battery compartment opens easily without tools, making the button batteries inside easily accessible. A small child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with European standards EN 62115 and EN 71-1.
The battery management system lacks a cell temperature monitoring device. During charging, the battery can overheat, explode, and catch fire. This could spread to surrounding materials and cause severe burn injuries to the user. The product does not comply with the requirements of the General Product Safety Regulation nor with the European standard EN 62133-2.
Due to inadequate insulation of the product, the user can receive an electric shock from easily accessible live parts or if the unsealed fixture accidentally falls into the aquarium water. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-11.