Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The battery management system does not have a device that monitors cell temperature. The product could overheat, which could cause burns or lead to a fire. The product does not comply with the General Product Safety Regulation, nor with the European standard EN 62133-2.
The product has small parts (the pullcords' ends) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The lithium-ion battery controller (LBC) may not provide reliable diagnostic results due to parasitic effects or fluctuations in circuit resistance, which can cause the integrated circuits monitoring the battery cell voltage to incorrectly detect anomalies. As a result, the system may switch to fail-safe mode while the vehicle is being driven, limiting engine power and preventing charging. If regenerative charging occurs, the fail-safe mode may turn off the main relay, causing a loss of engine power and a loss of propulsion while the vehicle is in motion, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to its shape and colour, the lighter is appealing to children. They could play with it and suffer burns or cause a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13869.
The earthing conductor is shorter than the current-carrying conductors. This could cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2.
The toy pushchair has an inadequate locking mechanism and is not sufficiently resistant to load. As a result, it may collapse easily, posing a risk that a child in the stroller could fall to the ground and suffer injuries. Additionally, the inadequate locking mechanism could lead to entrapment, finger crushing, and cuts or abrasions resulting from the sudden collapse of the folding mechanism. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The strength and the effectiveness of the retention system of the helmet are inadequate. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 1087.
The product has insufficient protection against water and moisture: the mains plug is neither waterproof nor protected against dust or solid objects. Moreover, the insulation between the live parts and the accessible parts of the product is insufficient. Additionally, the creepage distances between the live parts and the accessible metal casing are insufficient. Therefore, the user may have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62031.
The product contains the psychoactive cannabinoids cannabivarin, cannabigerol and cannabinol, as well as the semi-synthetic cannabinoid HCC and the synthetic substance MDMB-PINACA. These substances can cause mental and behavioural disorders, acute intoxication, impaired consciousness, neurological complications and cardiovascular effects The product does not comply with the requirements of the Tobacco Products Directive.
The toy has small parts (fish) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The battery compartment of the product can be easily opened, leaving batteries accessible. A child may put the batteries in the mouth, which could cause damage to the gastrointestinal tract of the child if swallowed. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
The conductors of the product lack sufficient insulation. Furthermore, the product is not protected against moisture. Consequently, live parts may become easily accessible to the user, who could receive an electric shock and a risk a of fire. The product does not comply with the requirements of the Low Voltage Directive.
The product expands more than 50% in size when in contact with water. If a child puts the product in their mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71.
An incorrectly fitted retaining ring in the Power Transfer Unit may cause an unexpected loss of traction and/or failure of the parking function, increasing the risk of an accident and injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to its shape and colour, the lighter is appealing to children. They could play with it and suffer burns or cause a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13869.
The product has a protruding part. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The accessible metal parts, such as the brush or some internal parts, are not sufficiently insulated and the safety distances between the live parts and the metal parts are insufficient. The supply cable may come into contact with hot metal parts and make live parts accessible to the user, causing a risk of electric shock.Additionally, some plastic parts of the appliance, such as the handle of the curling iron, may overheat during use, which may lead to fire. The product does not comply with the requirements of the Low Voltage Directive.
Due to its shape and colour, the lighter is appealing to children. They could play with it and suffer burns or cause a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13869.
Due to its shape and colour, the lighter is appealing to children. They could play with it and suffer burns or cause a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13869.
Because the top/bottom eyelets have not been properly crimped, the wire cable can become detached from the eyelets. This means that the safety belt does not restrain the passenger, who is at risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to its shape and colour, the lighter is appealing to children. They could play with it and suffer burns or cause a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13869.
The bag of the packaging is non-permeable. its opening exceeds the permitted size and includes drawstrings. If a child plays with it and tightens the drawstrings, the material can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The supplied plug adaptor does not meet dimensional requirements, preventing a secure connection with the socket and causing overheating over time. In addition, the supplied plug does not have capacity for a fuse, which is required for safe operation under fault conditions. Moreover, the earth pin of the adaptor is not solid. These could cause the adaptor or plug to catch fire or explode, posing a risk of fire. The product does not comply with the requirements of the Machinery Directive.
The product does not provide adequate earthing protection. Under fault conditions, accessible parts could become live. The user could therefore touch the accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.