Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The cable is not properly anchored (missing cable strain relief) and the accessible wires have inadequate insulation. Moreover, the plug can be partially inserted leaving a live pin exposed. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Live parts of the product are easily accessible. User could touch the live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The migration of boron from the toy slime is too high (measured value up to 502 mg/kg). Ingestion or contact with an excessive quantity of boron may harm the health of children by damaging their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
The plug can be partially inserted leaving a live pin exposed and the product has inadequate insulation. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
The product has an excessive volume of nicotine-containing liquid (measured value: 2.3 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive concentration of cadmium (measured value: 71.7% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The charger is fitted with a two-pin plug that does not include a fuse to provide essential protection in the event of a fault. If a fault occurs, the absence of adequate protection could cause overheating or battery failure, potentially leading to an explosion or fire. This product does not comply with the requirements of the Machinery Directive.
The product has an excessive concentration of benzoic acid (measured value: 0.76 %). Benzoic acid causes skin irritation. The product does not comply with the Cosmetic Products Regulation.
The passenger van has uneven material strength in certain areas of the bonnet. In the event of a collision with a pedestrian, this could reduce the bonnet’s ability to absorb impact energy and increase the severity of injuries to the pedestrian. The product does not comply with the Regulation on the approval and market surveillance of two- or three-wheel vehicles and quadricycles.
The product is supplied with a two-pin plug that cannot incorporate a fuse and therefore does not meet the required safety specifications. In the event of a fault or overcurrent, the absence of adequate protection could lead to overheating, increasing the risk of fire. The product does not comply with the requirements of the Machinery Directive.
The product contains benzyl alcohol, but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
A fuel leak in the presence of an ignition source increases the risk of a fire. In addition, pieces of the O-ring may clog the fuel lines, causing a loss of engine performance and increasing the risk of a crash.
Incorrect water tank capacity information can allow the vehicle to be overloaded and increase the risk of a crash.
An overheated printed circuit board increases the risk of a fire.
An engine stall or failure of electrical systems such as the instrument display or ABS, increases the risk of a crash.
The snap can detach from the recalled bibs and stroller bags, posing a risk of serious injury or death from a choking hazard to young children.
The recalled teething toy sets contain a pull string teething toy that violates the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Toy-Saf… lang="EN-US">toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of a child’s throat and become lodged, posing a risk of respiratory distress and a deadly choking hazard.
The recalled drain covers violate the entrapment protection standards of the https://www.cpsc.gov/Business--Manufacturing/Business-Education/FAQ?p=3… lang="EN-US">Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing deadly entrapment and drowning hazards to consumers.
The recalled drain covers violate the entrapment protection standards of the https://www.cpsc.gov/Business--Manufacturing/Business-Education/FAQ?p=3… lang="EN-US">Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing deadly entrapment and drowning hazards to consumers.
The recalled teething toys violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Toy-Saf… lang="EN-US">toys because the silicone strings are smaller and longer than permitted. The strings can reach the back of children’s throat and become lodged, posing a serious risk of respiratory distress and deadly choking hazard.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risk of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.
A cracked weld may result in the collapse of the crane column when in use, increasing the risk of injury to the operator or others nearby.
A winch that operates unintentionally may increase the risk of injury.