Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The product contains mercury (measured value: 85.92 mg/kg). Mercury accumulates in the body and can damage the kidneys, brain and nervous system. Additionally, it may affect reproduction and the unborn child. The product does not comply with the Cosmetic Products Regulation.
The cable of the product lacks sufficient insulation. The user could therefore touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product can tip over when pulled over an edge. This could cause injuries to the child and users. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1273.
The product can tip over when pulled over an edge. This could cause injuries to the child and users. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1273.
The product has small parts (zip pull). A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product is not supplied with a stabiliser bar. It is not clear to the user that a locking mechanism is required for the product and if the user uses the ladder extended to full length, it may become unstable, causing the user to fall and receive injuries. The product does not comply with the General Product Safety Regulation.
The cable is not properly anchored, and the accessible wires have inadequate insulation. Consequently, the user could touch accessible live parts, leading to a risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The cable is not properly anchored, and the product lacks adequate insulation. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The driver airbag inflator may cause uncontrolled inflation and release metal fragments when the airbag is activated, which can cause injury to the occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Air bags with insufficient pressure retention increase the risk of ejection and injury during a crash.
Air bags with insufficient pressure retention increase the risk of ejection and injury during a crash.
Referencing an incorrect GAWR can lead to unintentionally overloading the rear tires, increasing the risk of a crash.
The incorrect glaze may reduce the driver's visibility, increasing the risk of a crash.
Seat bracket failure can increase the risk of injury during a crash.
A disconnected half shaft can result in a loss of drive power, increasing the risk of a crash.
A fuel leak near the rear tire can increase the risk of a crash or injury. In addition, a fuel leak in the presence of an ignition source increases the risk of a fire.
The recalled bed rails violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN">adult portable bed rails because users can become entrapped within the bed rail, or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. In addition, the bed rails do not bear the required hazard warning labels.
Electrical conductors within the sauna heater kits can overheat, posing a fire hazard and risk of serious injury or death.
The truck’s circuit board can overheat and ignite, posing fire and burn hazards.
The ice axe shaft can break at the handle during use, posing a fall hazard, which can result in serious injury or death.
The power strips do not contain supplementary overcurrent protection, which creates a risk of fire if the power strips are overloaded. The resulting fire can cause serious injury or death from smoke inhalation and burns.
The magnet ball toys violate the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Toy-Saf… standard for toys because they are high-powered magnets, posing an ingestion hazard to children. When high-powered magnets are swallowed, they can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.
The recalled LED lights violate the mandatory standard for consumer products containing button cell or coin batteries because the lights contain lithium coin batteries that can be accessed easily by children, posing an ingestion hazard. Additionally, the screw used on the remote controls to secure the battery compartments that contain a lithium coin battery does not remain attached. Also, the packaging does not have the warnings as required by https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines…’s Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death.
The recalled DuraTrac gas connectors contain a manufacturing defect that could cause a gas leak, posing a fire hazard to consumers.