US NHTSA records for Jeep Cherokee. Check the affected model years, then verify your exact vehicle with NHTSA.
Results are official records from named sources. Coverage is incomplete. Match the exact model, batch and market, and confirm the latest instructions with the official source. A missing result is not a safety clearance.
100historical campaigns
6campaigns matching year filter
2,812complaint rows in window
2monitored investigations
25V011Received 2025-04-29POWER TRAIN
Affected model years: 2017, 2018, 2019
A loss of drive power can increase the risk of a crash. A loss of park function can cause an unintended vehicle rollaway, which can increase the risk of a crash or injury.
Official action: Dealers will update the drivetrain control module and PTU software and replace the PTU, as necessary free of charge. Owner notification letters were mailed beginning February 19, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 01C.
26V059Received 2026-02-02EXTERIOR LIGHTING:TURN SIGNAL
Affected model years: 2026
Trailer brake lights and turn signals that do not illuminate reduce visibility to other drivers, increasing the risk of a crash. Additionally, trailer brakes that fail increase the risk of a crash.
Official action: Dealers will replace the trailer tow module, free of charge. Owner notification letters were mailed beginning March 17, 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03D. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 10, 2026.
26V223Received 2026-04-09SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
Affected model years: 2026
A loss of anti-lock brakes or electronic stability control increases the risk of a crash.
Official action: Dealers will update the brake system control module software, free of charge. Owner notification letters were mailed April 28, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 29D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning April 16, 2026.
26V290Received 2026-05-07POWER TRAIN
Affected model years: 2019, 2020, 2021, 2022, 2023
A failed PTU may result in a loss of drive power or vehicle rollaway, increasing the risk of a crash or injury.
Official action: Dealers will update the Drivetrain Control Drivetrain Control Module, PTU, and Electronic Park Brake software, and replace the PTU, as necessary, free of charge. Interim owner notification letters explaining the safety risk were mailed June 25, 2026. Additional letters will be sent once the final remedy becomes available. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 40D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning May 14, 2026.
26V531Received 2026-08-13BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Affected model years: 2026
A rearview camera image that fails to display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Official action: Radio software will be updated by a dealer or through an over-the-air (OTA) update, free of charge. Owner notification letters were mailed beginning September 2, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 78D. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov on August 20, 2026.
26V559Received 2026-09-01TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
Affected model years: 2026
A TPMS warning light that fails to notify the driver of low tire pressure increases the risk of a crash.
Official action: Dealers will update the radio frequency hub software, free of charge. Owner notification letters were mailed beginning September 17, 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 54D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on September 9, 2026.
Source snapshots: recall files 4 October 2026; complaint file 3 October 2026; investigation file 29 September 2026. Individually labelled archived records retain their older date.
Consumer reports — allegations
Complaint aggregates by model year
NHTSA says complaints are consumer reports. RecallRecall excludes narratives, VINs, names, contact details and locations. A crash, fire, injury or death flag is reported information, not an independently verified causal finding.
NHTSA defect investigations
Open or recently opened investigations
EA21002: Desiccated Air Bag Inflator Rupture open
Opened 2021-09-17Closed not closedAIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Official NHTSA investigations information
RQ98023: BRAKE ROTOR DISC/HUB SEPARATION open
Opened 1998-11-13Closed not closedSERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:DISC:ROTOR
CHRYSLER CONDUCTED A SAFETY RECALL, 98V-005, ON JANUARY 5, 1998, INVOLVING APPROXIMATELY 225,000 1993 GRAND CHEROKEE, 1990-91 CHEROKEE, WRANGLER AND COMANCHEE, AND 1989-91 EAGLE PREMIER AND DODGE MONACO.THE FRONT DISC BRAKE ROTORS OF THESE VEHICLES MAY EXPERIENCE SEVERE CORROSION IF OPERATED FOR AN EXTENSIVE PERIOD IN THE SALT BELT STATES.OWNERS IN CONNECTICUT, ILLINOIS, INDIANA, MAINE, MASSACHUSET, MARYLAND, MICHIGAN, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WISCONSIN, AND THE DISTRICT OF COLUMBIA WILL RECEIVE REPLACEMENT ROTORS THAT ARE COATED WITH A CORROSION PROPOTECTION.CHRYSLER BEGAN OWNER NOTIFICATION ON MARCH 9, 1998.ODI HAS RECEIVED 15 COMPLAINTS FROM OWNERS OF MODEL YEAR 1992-95 JEEP CHEROKEE VEHICLES ALLEGING THAT ONE OR BOTH OF THE FRONT BRAKE ROTOR DISC HAD SEPARATED FROM ITS HUB, CAUSING THE VEHICLES TO SEVERELY PULL TO ONE SIDE AND/OR SIGNIFICANTLY EXTENDED ITS STOPPING DISTANCE.TWELVE OF 15 COMPLAINTS ORIGINATED FROM WITHIN THE RECALLED STATES.
Linked recall campaign: 98V005
Official NHTSA investigations information