Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The cord of the soother holder is too long. It can become wrapped around the neck of the baby, leading to strangulation. Moreover, due to the reduced diameter of the product, it could break, leading to risk of choking. The product does not comply with the General Product Safety Regulation.
Due to the design of the product, the user can reach into the product and touch the moving blade. Therefore, the user can suffer cuts in the fingers or in the hand. The product does not comply with the requirements of the Low Voltage Directive.
The product has an excessive concentration of cadmium (measured value: 38.9% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The rate of nickel release is too high (measured value up to 6.79%). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the General Product Safety Regulation not with the REACH Regulation.
The plastic material of the toy's face has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and diisobutyl phthalate (DIBP) (measured values up to 24 % and 0.2% by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The cream does not provide the announced level of Sun Protection Factor (SPF). Consumers may therefore suffer sunburn and the chronic consequences of excessive sun exposure through the UV radiation contained in sunlight when using the product, including immunosuppression, skin ageing and skin cancer. The product does not comply with the Cosmetic Products Regulation.
Because of an identical model designation and incorrect packaging, although the gas water heater is configured only for use with natural gas, it can be mistakenly be sold and installed for use with liquefied petroleum gas (LPG), Use of LPG in this device can cause abnormal combustion, overheating, and potentially lead to fire or explosion, resulting in serious injury or property damage. The product does not comply with the Regulation on appliances burning gaseous fuels (GAR).
It is not possible to determine based on available documentation that there are sufficient battery protective systems in place to prevent thermal runaway from occurring. If the product is charged and left unattended overnight, a fault may occur potentially leading to the battery exploding and a fire starting. The product does not comply with the requirements of the Machinery Directive.
The product has insufficient insulation, creepage and clearance distances. In the event of an electrical fault, the user could receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The seat back of second row seats may not remain in a locked position. A seat back that has not been secured in a locked position may fail to restrain occupants properly, increasing the risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product does not provide adequate earthing protection. In the event of an electrical fault, the user could receive an electric shock. The product does not comply with the Low Voltage Directive.
According to the list of ingredients, the product contains pyrithione zinc, which is forbidden in cosmetic products. Pyrithione zinc may damage the unborn child, is toxic if swallowed, causes damage to organs through prolonged or repeated exposure. Additionally, the product contains allergens hydroxycitronellal, hexyl cinnamal, and limonene, but their presence is not indicated in the list of ingredients. Consumers are not aware of the presence and may suffer allergic reactions. The product does not comply with the Cosmetic Products Regulation.
The handle of the curling wand can overheat during use, causing burns. The product does not comply with the requirements of the Low Voltage Directive.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns. The product does not comply with the requirements of the General Product Safety Directive nor with the European standard EN 62133-2.
The children's feet can get trapped between the wheel and the bicycle frame, causing the child to fall out of the seat and suffer injuries. Moreover, the mounting screws of the bicycle seat have protruding parts which may cause cuts to the child. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14344.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns or a fire. The product does not comply with the General Product Safety Regulation, nor with the European standard EN 62133-2.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The mechanical strength of the power supply housing is inadequate. Moreover, the product is not protected against moisture. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 606598.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The mechanical strength of the power supply housing is inadequate. Moreover, the product is not protected against moisture. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 606598-1 and EN 60598-2.
The battery management system does not have a temperature monitoring device, which could lead the product to overheat and cause burns or lead to a fire. The product does not comply with the General Product Safety Regulation, nor with the European standard EN 62133-2.
There is insufficient clearance (< 10 mm), between the tube of the petrol particulate filter and the terminal protection cap of the 48 V belt-driven starter alternator. In wet conditions, the insufficient clearance and contact between these components can lead to water infiltration, causing an electric arc which may trigger a thermal event, such as overheating. There is a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.