Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The plug face of the product does not meet the dimensional requirements and there is not enough filler in the fuse. If there is a fault with the product or a surge in current, the product could overheat and catch fire. The product does not meet the requirements of the Low Voltage Directive.
The swing lacks restraining devices to keep the child in the seat (no belt or T-shaped restraint in the leg area). The child can therefore slip out of the swing and be seriously injured. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard DIN EN 71-8
The insulation may break down over time, if the light fitting is installed. This may cause a surge in current and the product to become live, leading to electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The appliance may continue to operate if the lid of the appliance is not correctly placed or fixed. Therefore moving parts inside the device become accessible to the user. This could lead to a risk of injury. The product does not comply with the requirements of the Low Voltage Directive.
The carrier does not provide adequate fastening or support, therefore, the baby may slip out, fall and suffer serious injuries. The product does not comply with the General Product Safety Regulation.
The toy has small parts (the key ring, chain, feet and mouth) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product expands when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive.
Premature screw wear at the gated ventral attachment point could cause the attachment point to accidentally come open during use. This could lead the user to fall and suffer serious or fatal injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
The internal wires are not stiff enough and could touch the metallic type plate. This could cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The insulation between the internal wires and the accessible parts of the appliance is not sufficient. This may result in a risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The audio system’s wiring harness may cause a noise due to faulty connections. If the sound in the car is lost, safety signals such as the seat belt warning signal may also fail. This may could lead to an accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has an excessive concentration of lead (measured value: 0.12 % by weight) in the black material in the handles. Lead is harmful to human health, accumulates in the body, and may affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
The plug pins do not meet the dimensional requirements and cannot make a secure connection to the plug socket. Over time, this will damage the socket and plug, which may cause the product to overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
Due to a defective component in the battery pack, the product can overhear during use, causing burns to the user or starting a fire. The product does not comply with the requirements of the Low Voltage Directive.
The product is not supplied with a stabiliser bar. It is not clear to the user that a locking mechanism is required for the product. If the user uses the ladder extended to full length, it may become unstable, causing the user to fall and receive injuries. The product does not comply with the General Product Safety Regulation.
The earth terminal is not protected against accidental loosening, which may lead to electric shock to the user in the event of an electrical fault The product does not comply with the requirements of the Low Voltage Directive.
The battery management system lacks a cell temperature monitoring device. The product can overheat and cause burns. The product does not comply with the General Product Safety Regulation, nor with the European standard EN 62368-1.
The product's braking system does not function properly which could lead the stroller to move unexpectedly when the brakes are partially engaged. This could lead to injuries to the user. The product does not comply with the General Product Safety Regulation.
The plug's pins are too close to the periphery and too short. If there is a surge in current, the plug could catch fire. The product does not comply with the requirements of the Low Voltage Directive.
The fuse within the plug has insufficient granular filler. The filler is required to ensure the safe operation of the fuse under fault conditions, and its absence could lead to the plug overheating and/or exploding. The product does not comply with the requirements of the Low Voltage Directive
The plug pins do not meet the dimensional requirements. As a result, the plug may not fit securely into a socket, causing damage over time and leading to overheating and fire. This product does not comply with the requirements of the Low Voltage Directive.
The plug pins do not meet the dimensional requirements. As a result, the plug may not fit securely into a socket, causing damage over time and leading to overheating and fire. This product does not comply with the requirements of the Low Voltage Directive.
The battery monitoring software is defective and is unable to promptly detect thermal instability within the high-voltage battery leading to a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic material of the toy's face has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP), diisobutyl phthalate (DIBP) and dibutyl phthalate (DBP) (measured values up to 0.05%, 0.05%, and 9.8% by weight, respectively). These phthalates may harm health by causing possible damage to the reproductive system. Moreover, the toy contains small parts (keyring) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation and the European standard EN 71-1.