Mooncow Limited — Teether — Ethan the Fox Teether
The product has small parts (the fox's feet) that can easily detach. A small child may put them in the mouth and choke. This product does not comply with the requirements of the Toy Safety Directive.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The product has small parts (the fox's feet) that can easily detach. A small child may put them in the mouth and choke. This product does not comply with the requirements of the Toy Safety Directive.
The battery monitoring system lacks a cell temperature monitoring device. The product can overheat, catch fire and cause burns. The product does not comply with the General Product Safety Regulation nor with the European standard EN 62133-2.
The fastenings may break and rip the fabric of the attachment system in several places. The baby may slip out, fall and suffer serious injuries. This product does not comply with the General Product Safety Regulation nor with the European standard EN 16512.
The product does not provide adequate fastening support. Therefore, the baby may slip out, fall and suffer serious injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 16512.
The attachment systems of the carrier have an excessive slippage. As a result, the baby may slip out, fall and suffer serious injuries. The product does not comply with the General Product Safety Regulation nor with the European standard EN 16512.
The plug does not meet the dimensional requirements. Additionally, it is not possible to determine based on available documentation that there are sufficient battery protective systems in place to prevent thermal runaway from occurring. If the product is charged and left unattended, a fault may occur potentially leading to the battery and/or charger exploding and a fire starting. The product does not comply with the requirements of the Machinery Directive.
The machine has insufficient emergency stop devices and lacks identification of the control devices. Therefore, moving parts can be accessed while they are moving, causing cuts to the user. In addition, owing to the difficulty in accessing the control panel located more than two metres from the ground, the user can touch live parts, while there are unidentified electrical conductors and the electric panel is insufficiently protected from the accumulation of dust generated by operating the machine. The user can therefore receive an electric shock. The product does not comply with the requirements of the Machinery Directive.
The product expands when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The plug pins do not meet the dimensional requirements and may not fit securely into a socket. This may cause damage over time, leading to overheating and a fire. The product does not comply with the requirements of the Machinery Directive.
Due to insufficient insulation and electric strength, in combination with the absence of the earth connection, the metal lamp housing may become live. Moreover, due to the absence of a cord anchorage, the wires may become subject to mechanical tension. The wires may become loose and can come into contact with among others the metal parts of the lamp, causing the metal parts to become live. The user could therefore touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Radio Equipment Directive nor with the European standards EN 60598-1 and EN 60598-2.
Due to insufficient insulation and electric strength the metal parts of the product (RJ45 port) and connected cables and devices may become live. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Radio Equipment Directive nor with the European standard EN 62368-1.
The toy's rattles and drum can easily break, resulting in small parts (plastic balls). A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product is not supplied with a stabiliser bar. It is not clear to the user that a locking mechanism is required for the product. If the user uses the ladder extended to full length, it may become unstable, causing the user to fall and receive injuries. The product does not comply with the General Product Safety Regulation.
The product is not supplied with a stabiliser bar. It is not clear to the user that a locking mechanism is required for the product. If the user uses the ladder extended to full length, it may become unstable, causing the user to fall and receive injuries. The product does not comply with the General Product Safety Regulation.
The product may not hold the claimed weight without bending or collapsing. This can cause injuries to the user from falling from the full extended height of the product. The product does not comply with the General Product Safety Regulation.
The toy contains small parts (of the pistol) that can easily detach. A small child may put them in the mouth and choke. Moreover, the presence of suction-cup tips on the projectiles can obstruct the respiratory tract of a small child and cause choking. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains a mixture of the preservatives methylchloroisothiazolinone (MCI) and methylisothiazolinone (MI), which are prohibited in leave-on cosmetics. MCI and MI cause severe skin burns and eye damage and may cause an allergic skin reaction. The product does not comply with the Cosmetic Products Regulation.
The product expands more than 50% in size when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive.
The sky lantern ascends in an uncontrolled way and is blown by the wind without control. It may land anywhere when the flame has not yet gone out, come into contact with flammable objects and ignite them, causing a fire. The product does not comply with the General Product Safety Regulation.
The electric wires of the power cable of the appliance can come loose or slip out of its connection, making live parts accessible. The user can therefore receive an electric shock.Additionally, the button enabling steam to be released is can easily come loose. Being a small part, small children can put it in the mouth and choke. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2-23
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product expands more than 50% in size when in contact with water. If a child puts the product in their mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive.
The plug face of the product does not meet the dimensional requirements and there is insufficient distance between the pins and the edge of the adaptor. The user can access live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product is not sufficiently stable and the support strap may easily break. The child could therefore fall out and be injured. The product does not comply with the General Product Safety Regulation nor with European standard EN 14036.