Hyundai Motor America recall 26V229: FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS
A fuel leak increases the risk of a fire.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
A fuel leak increases the risk of a fire.
Incorrect weight information may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
A fuel leak increases the risk of a fire.
The product does not provide adequate and complete support surrounding the child and therefore could result in the child slipping down or out of the seat and drowning. The product also does not have a crotch restraint connected to both the sitting surface and the child support.Moreover, the product is not marked, or accompanied, with relevant information, warnings, to enable consumers to assess and take precautions against the drowning risks posed by the product. The product does not comply with the General Product Safety Regulation.
The product has a plug that is not earthed. Consequently, the user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product expands more than 50% in size when in contact with water. If a child puts the product in their mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. Moreover, the product can generate small parts that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive concentration of cadmium (measured value up to 0.056% by weight). Additionally, the rate of nickel release is too high (measured value up to 89.89 µg/cm2/week). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. This product does not comply with the REACH Regulation.
The toy has small parts (eyes) that can easily detach. Small children may put them in the mouth and choke. Furthermore, the plastic bag of the packaging is too thin. If a child plays with it, the plastic can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The rate of nickel release is too high (measured value up to 24.63 µg/cm2/week). Additionally, the product has an excessive concentration of cadmium and lead (measured values up to 0.017% and 2.3% by weight, respectively). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. Lead is harmful to human health, accumulates in the body and may affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
The product contains water beads. If these products are swallowed, theycan block a young child’s airway leading to choking. This product does not comply with the requirements of the Toy Safety Directive.
Green pellet rodenticide, sold online to the general public, could be consumed by children, pets or other animals. The active substance is unknown, but the product is advertised as a rodenticide which will dehydrate and kill rodents. Moreover, the packaging does not have the required safety label, with risk-related indications in the national language. The user therefore lacks the necessary information on the dangers if the product comes into contact with the skin or if it is ingested. The product does not comply with the Biocidal Products Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The solders in the product have an excessive concentration of lead (measured values up to 67% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) nor with the European standard EN 62321-1:
The product has an insufficient granular filler of the fuse. Consequently, if a fault occurs during use, the fuse may fail to prevent fire and explosion. The product does not comply with the requirements of the Low Voltage Directive.
The plastic material of the cable has an excessive concentration of DEHP and DPB (measured values up to 2.1%and 0.33% by weight respectively). DEHP and DBP may harm the health by causing possible damage to the reproductive system and to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the European standard 62321-1.
The solders in the product have an excessive concentration of lead (measured values up to 40% by weight respectively). The plastic material of the cable has an excessive concentration of DEHP (measured values up to 0.18% by weight respectively). Lead poses a risk to the environment. DEHP and DBP may harm the health by causing possible damage to the reproductive system and to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the European standard 62321-1.
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 83% and 0.062% by weight, respectively).Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product is easily flammable and contributes to the spread of fire to a greater extent than what would be expected for a class E reaction to fire rating. The product does not comply with the Construction Products Regulation nor with the European standard EN13501-1.
The insulation material is easily flammable and contributes to the spread of fire to a greater extent than what would be expected for a Class E reaction to fire rating. The product does not comply with the Construction Products Regulation nor with the European standard EN 13501-1.
The toy contains small parts (beaded necklace and left leg) that can easily detach. A small child may put them in the mouth and choke. Moreover, the crown's points may cause injuries to the child. Finally, the beaded necklace is too long. It can become wrapped around the neck of a child, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The plug has no fuse, and the plug face does not meet the dimensional requirements. A correctly rated fuse is required to ensure the safe operation of the plug under fault conditions, and its absence could lead to the plug overheating and/or exploding, leading to fire. Moreover, the user could touch accessible live parts and receive an electric shock. The product does not comply with the General Product Safety Regulation.
The alarm volume is not sufficiently high and could not be noticed in the event of an emergency. People might not notice the alarm and get injured The product does not comply with the requirements of the Low Voltage Directive.
The product expands in size when in contact with water. If a child puts the product in the mouth or swallows it, contact with saliva or stomach liquids will cause the product to expand, which can result in occlusion of the respiratory tract or intestinal blockage. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains perfluorocarboxylic acid related compounds (PFCAs) (measured value: 1094.6 mg/kg).These substances bio-accumulate in wildlife and humans, posing a risk to human health and the environment. Moreover, the product has an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured value: 548.2 mg/kg). PFOAs are carcinogenic and pose a risk to the environment. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.
The product contains perfluorocarboxylic acid related compounds (PFCAs) and an excessive quantity of perfluorooctanoic-acid-related compounds (PFOAs) (measured values: 1094.6 mg/kg and 548.2 mg/kg, respectively). PFCAs and PFOAs bio-accumulate in wildlife, posing a risk to the environment. The product does not comply with the Persistent Organic Pollutants (POPs) Regulation.