Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The product has insufficient mechanical strength, insufficient nominal cross-section of the conductors and insufficient length of the cable between the plug and the first bulb. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
In case of obstruction of the air inlet, the product can overheat and melt and cause a fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2-23.
The product contains asbestos fibres. Asbestos could cause cancer. The product does not comply with the requirements of the Toy Safety Directive.
The product is not protected against moisture, despite being recommended for outdoor use. Consequently, water could penetrate the product and cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The toy has small, easily detachable parts (foam bullets) that can easily detach. A small child may put them in them mouth and choke. The battery compartment can easily be opened without use of any tools and the button batteries inside are easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with the European standards EN 62115 and EN 71-1.
A weld stud of insufficient strength on the third-row seatbelt anchorage bracket may result in the restraint system not functioning correctly in the event of an accident and affect occupant protection, leading to a risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has an excessive volume of nicotine-containing liquid (30ml) and an excessive concentration of nicotine (50mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-1
The toy has small parts (the eyes and nose) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (eyes) that can easily detach and the fibrous stuffing material of the toy is easily accessible due to the weakness of certain seams. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-1.
The fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has an excessive volume of nicotine-containing liquid (40ml) and an excessive concentration of nicotine (50mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product has an excessive volume of nicotine-containing liquid (35ml) and an excessive concentration of nicotine (50mg/ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The product is not protected against moisture, despite being recommended for outdoor use. Consequently, water could penetrate the product and cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The terminal block of the lamp is not permanently attached to the product's housing. The wires may become loose and can come into contact with the metal parts of the lamp, causing the metal parts to become live. The user could therefore touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-1.
The product is microbiologically contaminated with mesophilic aerobic bacteria, molds, and yeasts, including the yeast Candida albicans. The microorganism may cause illness in some consumers, particularly those with a weakened immune system. The product does not comply with the Cosmetic Products Regulation.
The plug face does not meet the dimensional requirements. As a result, the plug may overheat and/or explode. There is a risk of fire. This product does not comply with the requirements of the Low Voltage Directive.
The plug fuse has insufficient granular filler, and the plug face does not meet the dimensional requirements. As a result, the plug may overheat and/or explode. There is a risk of fire. Improvements are also required to product documentation and marking. This product does not comply with the requirements of the Low Voltage Directive.
The toy has a small part (the ear of the pop-up bunny figurine) that can easily detach. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The product may collapse when in use, causing the user to fall and suffer injuries. The product does not comply with the General Product Safety Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
Due to incorrect design of the product, water floods the live parts of the electrical wires. This can cause users to receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
In the event of airflow getting obstructed during use, the appliance could overheat. Consequently, the heating element may cut out while the motor continues to run, causing the casing to become excessively hot and leading to internal thermal damage. This overheating can ignite nearby object, leading to a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
An overloaded control unit may shutdown, causing a loss of drive power and increasing the risk of a crash.