Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The mechanical strength of the power supply housing is inadequate. Moreover, the product is not protected against moisture. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 606598.
The toy has small parts (the magnet from the fishing rod and the fish) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive or with European standard EN 71-1.
The solders have an excessive concentration of lead (measured value up to 36 %).Lead poses a risk to the environment. The product in the product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 14 %).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 49 %).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 42% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 42 %).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 37 %).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 12 %).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
A brake line connector that has not been tightened could lead to leakage of brake fluid, which would result in failure of the braking system, making it impossible to brake, leading to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The distances and protection between primary and secondary circuits are insufficient, which could cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61558-2-16 and EN 61558-1.
There is a combined risk that the torque applied to the hub nut of the rear axle could loosen it and that in some of the relevant trucks the hub nut is not crimped. A warning light for the ABS braking system could light up on the instrument panel. Abnormal vehicle noise and vibration might also occur. The wheel hubs might disconnect from the rear axle of the truck, which may lead to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy contains small magnets with a high magnetic flux (measured value up to 0.76 T²mm²). If a child swallows the magnets, they could attract one another causing intestinal blockage or perforation. Moreover, the bag of the packaging is non-permeable and its closing includes drawstrings. If a child plays with it and tightens the drawstrings, the material can cover the mouth and nose, causing the child to suffocate. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
At extremely high speeds a separation within the crown area of the tyre is possible. The tyre tread could deform with a local increase of diameter and could create interference with the car. This condition could cause a loss of vehicle control and increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The insulation of the product as well as the creepage distances between the primary and secondary circuits are not sufficient. The user can therefore touch live parts and receive an electric shock. Moreover, the cable of the product might overheat and melt, which could lead to burns. The product does not comply with the requirements of the Low Voltage Directive.
The insulation between live parts (primary circuit) and accessible parts (secondary circuit) is not adequate. Additionally, the internal transformer is not sufficiently insulated.Moreover, due to a default in the electronic component (optocoupler), an abnormal flow of current may occur, The user may therefore receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61558-2-16 and EN 61558-1
The product has an excessive concentration of cadmium (measured value: 4% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones, and may cause cancer. The product does not comply with the REACH Regulation nor with the General Product Safety Regulation.
The total filtration capacity of the mask is insufficient (measured values as low as 79%). Consequently, the product does not fulfil the health and safety requirements. Thus, even if combined with other recommended measures, it may not properly protect. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with European standard EN 149.
The product has insufficient mechanical strength, insufficient nominal cross-section of the conductors and insufficient length of the cable between the plug and the first bulb. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
There is insufficient creepage and clearance distance between circuits and the product has insufficient insulation. The user can access live parts and receive an electric shock. Additionally, if the power cable touches the metal plate, it may be damaged and pose an electrical hazard. Moreover, the handle of the product can overheat and cause burns to the user. This product does not comply with the requirements of the Low Voltage Directive.
The product has insufficient mechanical strength and the cross-section of the wires is too small. Additionally, the structure of the cord extension socket allows single-pole insertion of plugs. Therefore, the user could touch accessible live parts, and receive n electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The enclosure of the product is not sufficiently durable and can be easily opened, letting water in. The product is not sufficiently watertight. This could cause a short circuit and fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 61347-1 and EN 61347-2-13.
The product is not protected against moisture, despite being recommended for outdoor use. Moreover, the product has an insufficient nominal cross-section of the conductors and insufficient design, where the extension socket allows a single-pole plug to be inserted. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
The plastic of the toy contains excessive concentrations of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 16.41% by weight). This phthalate may harm the health of children, causing potential damage to the reproductive system. The product does not comply with the REACH Regulation.