Corp. Micro Bird, Inc. recall 26V286: ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION:PIPES, HOSES, AND FITTINGS
A damaged oil like may leak, increasing the risk of a fire in the presence of an ignition source.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
A damaged oil like may leak, increasing the risk of a fire in the presence of an ignition source.
A damaged oil like may leak, increasing the risk of a fire in the presence of an ignition source.
Incorrect weight information may lead to unintentionally overloading the vehicle, increasing the risk of a crash.
Heat exposure may damage the hose. A damaged hose may leak fuel, increasing the risk of a fire.
An incorrect load carrying capacity label may lead to improper loading of the vehicle, increasing the risk of a crash.
A delayed rearview image reduces the driver's view behind the vehicle, increasing the risk of a crash.
Entering a flooded roadway can cause a loss of vehicle control, increasing the risk of a crash or injury.
A passenger who is unable to fasten their seat belt is not properly restrained, increasing their risk of injury in a crash.
An unlit speedometer cannot show the vehicle's speed, increasing the risk of a crash.
An incomplete seat may not properly restrain an occupant, increasing risk of injury during a crash.
An instrument panel display that fails to show critical safety information, such as the speedometer and warning lights, increases the risk of a crash.
The solders in the product have an excessive concentration of lead (measured value up to 10.66 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 42 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 80 % by weight). Lead poses a risk to the environment. Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 7.5 % by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 15.6% by weight). Moreover, the product has an excessive concentration of short chain chlorinated paraffins (SCCPs) (measured value: 0.59% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.
The solders in the product have an excessive concentration of lead and cadmium. (measured values up to 86% and 0.22% by weight, respectively). The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 13% and 0.7% by weight, respectively). These phthalates may harm the health by causing possible damage to the reproductive system. Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The solders in the product have an excessive concentration of lead. (measured value: 0.17% by weight). The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 3.8% and 2% by weight, respectively). These phthalates may pause a risk to human health and the environment. Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The plastic material of the product has an excessive concentration of short chain chlorinated paraffins (SCCPs) (measured value up to 2.03% by weight). SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the Persistent Organic Pollutants (POP) Regulation.
The solders in the product have an excessive concentration of lead. (measured value: 14 % by weight). Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 3.9 % by weight). This phthalate may pose a risk to human health and the environment. Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The mechanical strength of the power supply housing is inadequate. Moreover, the product is not protected against moisture. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
Due to a failure with the Printed Circuit Board (PCB), the product may overheat, melt or generate smoke, which lead to the user suffering burns. The product does not comply with the requirements of the Low Voltage Directive.
The insulation and dimensions of the power socket of the product are inadequate. The user could touch accessible live parts, which may cause an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335.
The product has an excessive volume of nicotine-containing liquid (12 ml). This could lead to the accidental consumption of a high dose of nicotine. Nicotine is acutely toxic and can endanger the user’s safety, notably if the product comes into contact with the skin or is ingested. The product does not comply with the requirements of the Tobacco Products Directive.
The carbon rims may have internal cracks that can lead the rims to break or deform. If a relevant load is placed on the bicycle this can cause the user to fall and be injured. The product does not comply with the General Product Safety Regulation.