Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
Parts of the product may detach, leading to the internal shaft becoming exposed, which could cause injury to the user. The product does not comply with the requirements of the Radio Equipment Directive.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The Safety Data Sheet classifies this product as a flammable liquid that may cause eye irritation and organ toxicity. However, the product labelling omits the required hazard information, leaving users unaware of the dangers of the product. The product does not comply with the Classification, Labelling and Packaging (CLP) Regulation.
The suction cups of the arrows can detach and consequently the arrow can be launched without without the suction cup. The arrow can hit a child's eye, causing injuries and damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (whistles) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1
The toy has small parts (zip slider) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 21.43% and 0.64% by weight, respectively). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.
The toy has small parts (the blue part of the upper part of the horn) that can easily detach. A small child could put it in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has long functional cords close to the neck. The cords may become trapped during various activities of a child, leading to strangulation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
The product contains p-phenylenediamine (PPD) (measured value 9.68 g/100g by weight) without coupler substances. Uncoupled PPD is an extreme skin sensitiser and can cause allergic contact dermatitis. The product does not comply with the Cosmetic Products Regulation.
The product has small parts (eye, clip) that may easily detach. Small children may put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
A bolt with a reduced shank diameter could cause the torque pin to slide out of the rear lower suspension arm. This may lead to overload and failure of the lower suspension arm, which can cause damage to other suspension components and the rear brakes, which could cause an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy has a small part (the end cap of the metal shaft with the coloured wooden rings) that can easily detach. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard 71-1.
The tyres were produced under non conforming cure conditions. This nonconformity may result in incomplete vulcanization of the tread or bonding surface and lead to tread separation in service which could increase the risk of accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic bag packaging is too thin. If a child places the plastic bag over its head, it could suffocate. The product does not comply with the requirements of the Toy Safety Directive.
The toy has small parts (the suction cups) that can easily detach. A small child could put it in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive
The controller casing is too thin and can easily break and the cable of the lighting chain can easily detach or break. Due to this, live parts are made accessible and the user can receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-20.
The toy has protruding parts. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy set has small magnets with a high magnetic flux (measured value up to 112 Kg²mm). If a child swallows the magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has small parts (protective cover) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders in the product have an excessive concentration of lead (measured value up to 40.1 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronical equipment (RoHS 2 Directive).
Due to inadequate grounding, insulation, cross section area of the power cord and inadequate clearance and creepage distances, the product poses a risk of electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-2-41 and EN 60335-1.
The battery compartment can easily be opened without use of any tools and the batteries inside are easily accessible. If a child puts them in the mouth, the batteries can overheat and release electrolyte which can be ingested by the child and cause damage to the gastrointestinal tract. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.