Ford Motor Company recall 26V335: EQUIPMENT:OTHER:LABELS
The incorrect tire size, tire pressures, and GAWR listed on the labels can allow the vehicle to be overloaded or have improperly inflated tires, increasing the risk of a crash.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The incorrect tire size, tire pressures, and GAWR listed on the labels can allow the vehicle to be overloaded or have improperly inflated tires, increasing the risk of a crash.
Broken shock retainer bolt heads and washers may detach and become a road hazard for other vehicles, increasing the risk of a crash.
Broken shock retainer bolt heads and washers may detach and become a road hazard to other vehicles, increasing the risk of a crash.
A fuel leak in the presence of an ignition source, increases the risk of a fire.
An unsecured wheelchair can move during transit, increasing the risk of injury.
Broken shock retainer bolt heads and washers may detach and become a road hazard for other vehicles, increasing the risk of a crash.
The product has small parts (beads, teething tips) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The solders in the product have an excessive concentration of lead, while the plastic material of the cable has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured values up to 62% and 2.9% by weight, respectively). Lead poses a risk to the environment. DEHP pose a risk to human health and the environment The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The creepage distances and clearances between live parts and accessible parts of the insulation of the terminal block are too small, live parts may be accessible.In case the product is connected to external wiring that is too thin, the user can touch, the front side of the screw terminal and receive an electric shock.The manufacturer's instructions suggest that the product can be installed with two wires under a screw terminal. This may cause sparking and lead to a fire. The product does not comply with the requirements of the Radio Equipment Directive nor with the European standards EN 60669-2-1 and EN 60669-1.
The product has an insufficient granular filler of the fuse. Consequently, if a fault occurs during use, the fuse may fail to prevent fire and explosion. Additionally, the mains plug does not meet the dimensional requirements. If there is a fault with the product, it could overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
The product has an excessive concentration of arsenic (measured value: 2.43 mg/kg). Arsenic may cause cancer, may damage fertility or the unborn child, causes damage to organs through prolonged or repeated exposure. Moreover, the product contains benzyl alcohol, but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the REACH Regulation.
The product has an excessive concentration of arsenic (measured value : 1.27 mg/kg) and copper (measured value : 250 mg/kg). Arsenic may cause cancer, may damage fertility or the unborn child, causes damage to organs through prolonged or repeated exposure. Copper can cause liver and kidney damage and might affect fertility. Moreover, the product contains benzyl alcohol in a quantity exceeding the maximum permitted (> 0.001%), but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the REACH Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The product has an excessive concentration of lead (measured value: 6.1 mg/kg). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity (only if exposure to children expected) and may affect breast-fed or unborn children. The product contains benzyl alcohol, but the presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product contains methylisothiazolinone (MI), which is prohibited in leave-on products. MI causes severe skin burns and eye damage (if in contact with the eyes), and may cause an allergic skin reaction. The product has an excessive concentration of benzisothiazolinone (measured value: 0.01 % by weight). Benzisothiazolinone causes skin irritation and may cause an allergic skin reaction. The product has an excessive concentration of diethylene glycol (DEG). Diethylene glycol can be lethal as it acutely harms kidneys and the nervous system when swallowed or in contact with the skin. The product does not comply with the REACH Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The product contains radioactive materials continuously emitting ionizing radiation. Moreover, the radioactive material can be easily accessed and ingested. Therefore, the user could be exposed to an excessive level of ionizing radiation that can cause adverse health effects, such as damage to tissues and DNA. The product does not comply with the General Product Safety Regulation.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.
Inadequate protection allows access to live parts. The user could therefore touch the accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation.