Grand Design RV, LLC recall 26V354: SUSPENSION:REAR:SPRINGS:COIL SPRINGS
Broken shock retainer bolt heads and washers may detach and become a road hazard, increasing the risk of a crash.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
Broken shock retainer bolt heads and washers may detach and become a road hazard, increasing the risk of a crash.
The incorrect wiring may not make adequate contact, increasing the amperage and risk of a fire.
A loose seat belt may not properly restrain an occupant during a crash, increasing the risk of injury.
The product has an excessive concentration of lead (measured value up to 20% by weight), bis(2 ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 3.8% and 2.4% by weight, respectively). Lead poses a risk to the environment. DEHP and DBP pose a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 74% and 0.12% by weight, respectively). In addition, the cables have an excessive concentration of Bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 6.4% by weight). Lead and cadmium pose a risk to the environment. DEHP may harm the health of children by causing possible damage to their reproductive system. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive) nor with the REACH Regulation.
The product has excessive concentrations of lead, cadmium, Bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 92%, 0.47%, 6.3% and 0.5% by weight, respectively). Lead and Cadmium pose a risk to the environment. DEHP and DBP pose a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The plastic shield of the soother can easily detach. A small child could put it in the mouth and choke. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1400.
The article has too many duds with and without fuse, users can ignite them causing injuries and/or burns. Additionally, the fireworks may burst or release burning material over an extended period of time after functioning. Moreover, the user may decide to reignite parts of the product, which poses a risk of burns and/or injuries. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947
The solders in the product have an excessive concentration of lead (measured value up to 51% by weight). The product also has an excessive concentration of bis(2‑ethylhexyl) phthalate (DEHP) (measured value up to 20% by weight). Lead poses a risk to the environment, whereas DEHP poses a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 61% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product presents a risk of fire and electric shock. The automatic defrost mechanism's cable may overheat, which could lead to fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-2.
The product contains certain ingredients that may cause an allergic reaction in the user when the product comes into contact with the skin. The product does not comply with the General Product Safety Regulation.
Due to incorrect mains electrical coupling, the product poses a risk of electric shock to the user. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2.
The product has not been authorised for sale to the general public. The product has an excessive concentration of brodifacoum (measured value: 0.05 g/kg by weight). Brodifacoum can cause inhibition of blood clotting, damage to blood vessels leading to internal bleeding and organ damage in case of ingestion. Moreover, the packaging does not have the required safety label, with other ingredient and risk-related indications in the national language. The user therefore lacks the necessary information on the dangers if the product comes into contact with the skin or if it is ingested. The product does not comply with the Biocidal Products Regulation nor with the Regulation on the classification, labelling and packaging of substances and mixtures (CLP).
The product lacks child-resistant fastening. The product can cause severe harm (chemical pneumonia) to children if they access the product. The product does not comply with the Classification, Labelling and Packaging (CLP) Regulation.
The product is not properly insulated, and the air and creepage distances are insufficient. Furthermore, the protective conductor ‘terminal’ can easily become loose. Consequently, the user could have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards: EN 60598-1, EN 60598-2-1, EN 60320-1 and EN 60320-2-2.
Due to a faulty design of the product, the metal parts of the luminaire may easily become loose. Furthermore, the cross-section of the external cable is insufficient. Consequently, the user could have access to live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-4.
The toy has small parts (fish and a bumblebee) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has small parts (wheels of the car) that can easily detach or break. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard 71-1.
The product has inadequate insulation. Moreover, the clearance and creepage distances are too small. The user could touch accessible live parts, and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 62369-1 and EN 50075.
The product has small parts (key ring and chain, soother) that may easily detach. Small children may put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the eyes and the nose) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has small parts (the small beads and the heart-shaped fobs) that can easily detach. A small child may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.