Yamaha Motor Corporation, USA recall 26V367: EXTERIOR LIGHTING:TURN SIGNAL
Turn signals that do not function properly may fail to indicate the rider's intention to change direction, increasing the risk of a crash.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
Turn signals that do not function properly may fail to indicate the rider's intention to change direction, increasing the risk of a crash.
The product may contain formamide, plasticizers, polycyclic aromatic hydrocarbons and flame retardants, which are dangerous for human health and could cause cancer. Moreover, the product has small parts. Small children could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1,
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The product has an excessive concentration of 2-phenoxyethanol (measured value: 1.2 %). 2-phenoxyethanol is haematotoxic, a mild irritant and may damage the liver. The product does not comply with the Cosmetic Products Regulation.
Due to the weakness in the connection between the carrying handle and the shell of the car seat, one side of the handle could detach, causing the child to fall and be injured. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1888-1.
The toy has protruding parts that are too long ("ear" parts of the permanent protective lid). A small child may put them in the mouth and choke. The product does not comply with the General Product Safety Regulation.
In case an oversized utensil is used and the gas cartridge cover is left open or removed, the surface and gas cartridge overheat. The user could touch the hot surface and suffer burns. The product does not comply with the Regulation on appliances burning gaseous fuels (GAR) nor with the European standard EN 17476.
The toy has small parts (suction cups) that can easily detach. Small children could put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European Standard EN 71-1.
The product does not provide the expected protection due to insufficient sliding resistance. Users may slip and get injured. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the relevant European standard EN 20345.
Vehicles fitted with a 1.5-litre engine may suffer engine failure due to water pump pulley slippage. This can misalign the timing belt, cause the engine to shut down, and may allow parts to fall onto the road, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The affected adapters do not feature any safety shutters, therefore allowing access to live parts.Moreover, the 3-pin plug does not meet the dimensional requirements and may not make a secure connection with the mains socket as the plug pins are positioned too close to the edge of the adapter. This increases the risk of accidental contact during insertion or removal.Additionally, the adapters do not include any fuse which is required to ensure safe operation under fault conditions. In the event of an electrical surge or fault, the plug may overheat and ignite, causing a fire. The product does not comply with the requirements of the Low Voltage Directive.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl) phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
According to the list of ingredients, the product contains Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO), which is prohibited in cosmetic products. TPO may harm the reproductive system, may harm the health of the unborn child and may cause allergic skin reactions. The product does not comply with the Cosmetic Products Regulation.
The product contains the allergenic fragrance benzyl alcohol, which is not mentioned in the list of ingredients. Failure to mention the presence of an allergenic fragrance in the labelling in leave-on products may cause dermatitis/eczema, or more serious skin reactions in already sensitized persons. The product does not comply with the Cosmetic Products Regulation.
The wheel bolts were not tightened in accordance with the torque specifications. The bolts and the wheel assembly could detach while the vehicle is in motion, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Because the safety mechanisms are easily bypassed, and because of the lack of a protective shielding, direct access to laser radiation from the reflected laser beam during operation is possible. Looking directly into the laser beam or exposure via scattered radiation could damage a person’s sight. The product does not comply with the requirements of the Machinery Directive or with European standard EN 60825-1.
The product's insulation between the primary parts and the accessible output connectors is not adequate. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-2-29.
The product's insulation between the live primary parts and the accessible output connectors is not adequate. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335.and EN 61558-2-16.
This product is not resistant to mechanical impact and is not adequately insulated. Moreover, the creepage distances between electrical conductors are insufficient. The user could touch live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and EN 60335-2-23.
Some vehicles with dual-pinion electric power steering may lose steering assistance due to a gearbox bearing failure and EPS software calibration defect. This could cause the steering to lock, preventing the driver from turning the wheel and increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The upper bolts on the lower suspension arm may not have been tightened correctly. This could cause the arm to loosen, creating a clicking noise at the front and potentially leading to loss of vehicle control, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to the weakness of the seams, the fibrous stuffing material of the toy is easily accessible. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product contains formaldehyde (measured value: 0.137%). Formaldehyde is a skin sensitiser and can trigger allergic reactions and may cause cancer. The product does not comply with the Cosmetic Products Regulation.
The drone’s battery and its supplied charger are electrically incompatible. This causes the battery to degrade more quickly and poses a risk of fire. The product does not comply with the requirements of the Toy Safety Directive.