Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The solders in the product have an excessive concentration of lead (measured value up to 37% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 62 % by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The front roof screws and hinges can easily detach. The detached screws have sharp points. Due to their small size, small children could put them in the mouth and choke and could suffer cuts. The product does not comply with the requirements of the Toy Safety Directive.
The battery compartment can easily be opened without use of any tools and the button batteries inside are easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive.
The battery compartment can easily be opened without use of any tools and the button batteries inside are easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive.
The solders in the product have an excessive concentration of lead (measured value up to 53 % by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 54% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The head airbags in the affected vehicles may not have been bolted according to specifications, which could cause the airbag to deploy incorrectly or the inflator to move out of position and strike occupants in the event of an accident, leading to injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to inadequate moisture protection and insulation of the product, the user can receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598.
The migration of aluminium from the toy is too high (measured value up to 2724 mg/kg). Aluminium is toxic for children if ingested. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
The product is missing restart protection. If the power switch is locked, the angle grinder starts up immediately after the battery is installed. This creates a risk that the machine could start up unintentionally, leading to injuries. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 62841.
The product's neck opening is too large, which could cause the baby to slip inside the sleeping bag, covering its mouth and/or nose area and leading to suffocation. Moreover, the accessible label in the form of the loop poses a risk of finger entrapment. In addition, the product has small parts (metal snaps) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the General Product Safety Regulation nor with the European standard EN 16781.
The product has small parts (elements of a plastic ring) that may easily detach. Small children may put them in their mouth and choke. Moreover, the cord is too long. It can become wrapped around the neck of a child, leading to strangulation. In addition, the self-retracting cord is too thin and may cause cuts. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The gloves do not provide adequate protection against abrasion and can easily tear, leading to injuries. The product does not comply with the requirements of the Personal Protective Equipment Regulation (PPE) nor with the European standard EN 388.
The baby carrier does not come with instructions for use. This could lead to a child not being properly secured in the baby carrier, with the risk of the falling and receiving injuries. The product does not comply with the General Product Safety Regulation.
The product has a sharp edge in the folding mechanism, which could wear away the insulation of the product wiring over time and cause the bike to fail during use, potentially leading to injuries to the user. The product does not comply with the requirements of the Machinery Directive.
The supplied plug adaptor does not meet dimensional requirements, preventing a secure connection with the socket and causing overheating over time. In addition, the supplied plug does not have capacity for a fuse, which is required for safe operation under fault conditions. These issues could cause the adaptor or plug to catch fire or explode, posing a risk of fire. The product does not comply with the requirements of the Machinery Directive.
The product has small parts (teething tips) that may easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
A fatigue crack in the fork steerer tube may develop over time, which could cause the fork to fail during use, potentially leading to a fall and injuries to the user. The product does not comply with the requirements of the Machinery Directive.
The product is not structurally stable and has no warnings to indicate that it cannot be used overnight. If a baby was left in the product overnight, their natural movements could cause the product to collapse or fall sideways, resulting in injuries. Moreover, the crib is supplied with a cover which would fully enclose and cover the baby, potentially leading to suffocation. The product does not comply with the General Product Safety Regulation.
The tricycle is not stable enough. When used on uneven ground, it could easily overturn, causing injuries to the child. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product's on and off button can be easily dislocated. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product has an excessive concentration of hydrogen peroxide as a bleaching substance (measured value: 8,1% by weight). Hydrogen peroxide is harmful if swallowed and it can also cause irritation and ulcers when in contact with skin or mucous membranes. The product does not comply with the Cosmetic Products Regulation.
An unexpected loss of drive power increases the risk of a crash.