Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The product is microbiologically contaminated with the bacteria Burkholderia, which may potentially cause illness in some consumers, particularly those with a weakened immune system. The product does not comply with the Cosmetic Products Regulation.
The product contains an excessive concentration of lead (measured value: 1.33 mg/kg). Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity and may affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
The rivets attaching the chains to the flail-cutter could break. The chains might consequently detach during use and hit the user causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
The battery compartment can be easily opened without use of any tools and the batteries inside are easily accessible. If a child puts them in the mouth, the battery can release electrolyte which can be ingested by the child and cause damage to the gastrointestinal tract Moreover the battery pack overheats, which may lead to burns. The product does not comply with the requirements of the Toy Safety Directive nor with European standards EN 62115.
Vehicles equipped with a 1.0 T-GDI petrol engine may have an incorrectly routed vacuum hose, causing the vacuum inlet to remain under pressure and generate vibrations that could lead to cracking of the hose, potentially reducing braking efficiency and increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Interior door handles may deactivate when the key is in engine-running mode, which could prevent occupants from exiting the vehicle, potentially leading to injury in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Interior door handles may deactivate when the key is in engine-running mode, which could prevent occupants from exiting the vehicle, potentially leading to injury in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product lacks adequate insulation. The user can access live parts and receive an electric shock. Moreover, insulation distances on the printed circuit board are insufficient. This might cause overheating or fire. The product does not comply with the requirements of the Low Volage Directive.
The solders in the product have an excessive concentration of lead. (measured value: 4% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 47% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 59% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
Batteries can overheat and cause burns if the toy is blocked. Moreover, the battery compartment can easily be opened without the use of any tools, and the batteries inside are easily accessible. If a child puts them in the mouth, the battery can release electrolyte which can be ingested by the child and cause damage to the gastrointestinal tract" The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
The solders in the wristwatch have an excessive concentration of lead (measured value up to 34% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 23% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 20% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product lacks adequate insulation. The user can access live parts and receive an electric shock. Moreover, insulation distances on the printed circuit board are insufficient. This might cause overheating or fire. The product does not comply with the requirements of the Low Volage Directive.
The solders in the product have an excessive concentration of lead (measured value up to 43 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 57 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The creepage and clearance distances between the primary and secondary circuits are inadequate. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard 60335-2-29.
The socket box and the connector’s socket base may allow users to access live parts. Furthermore, the conductors lack sufficient insulation. Moreover, the cables may become detached and make live parts accessible. Additionally, the product is not protected against moisture. Consequently, there is a risk of fire or the user receiving an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The solders in the product have an excessive concentration of lead (measured value up to 27 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 35 % by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
Due to its shape and colour, the lighter is appealing to children. They could play with it and suffer burns or cause a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 13869.