Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
Due to the inadequate welding of the joints for the ISOFIX anchor points, they can easily break in the event of an accident, causing injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The battery compartment can easily be opened without use of any tools and the button batteries inside are easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. Moreover, the LED light is too powerful (measured value 0.15 W).. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 62115.
The solders in the product have an excessive concentration of lead (measured value up to 40 % by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 85% and 0.5% by weight, respectively).Lead poses a risk to the environment.Cadmium bio-accumulates and poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The toy has protruding parts. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The solders in the product have an excessive concentration of lead (measured value up to 73 % by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
A defective valve assembly may lead to noises, a loss of power and/or propulsion failures (damage to the engine). Further damage may lead to an oil leak. This may lead to accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The laser beam is too powerful (measured values up to 6.9 mW) and the projector is not properly labelled. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the General Product Safety Regulation nor with the European standards EN 60825-1 and EN 50689.
The toy has a protruding part. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The covers enclosing live parts can be removed without a tool. Therefore, a user could access and touch live parts, creating a risk of electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The rear suspension springs may not have been manufactured with the required dimensions, which could cause the left or right rear spring to break. If this occurs, the vehicle may sag and the broken spring could fall onto the road, increasing the risk of an accident for the vehicle occupants and other road users. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has live parts (controller without cover or power supply cord), which are easily accessible. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60598-2-20.
The solders in the product have an excessive concentration of lead and cadmium (measured values up to 62.3% and 0.187% by weight, respectively). Lead and cadmium pose a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The ball joints installed in tie rods of Unimog 405 and Unimog 437 vehicles may not have fully undergone the prescribed hardening process. This can result in increased wear and reduced fatigue strength up, with a possible fatigue fracture. In the event of such a break, steering would no longer be possible and there would be a risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The table can easily break under weight and collapse, leading to injuries for the users. The product does not comply with the General Product Safety Regulation nor with the European standards EN 581-1 and EN 581-3.
During engine operation, the fuel line may move within its retaining clip in the engine compartment. This movement could damage the fuel line and cause a fuel leak, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product has a protruding part. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 45.24 % by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
A winch that operates unintentionally may increase the risk of injury.
The electrical system may overheat without a ground, increasing the risk of a fire. There is also an increased risk of injury from electrical shock.
The electrical system may overheat without a ground, increasing the risk of a fire. There is also an increased risk of injury from electrical shock.
A fuel leak increases the risk of a fire.
A short may cause the inverter AC wiring to overheat, increasing the risk of a fire.
A fire increases the risk of injury.