Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The supplied plug does not meet dimensional requirements and cannot make a secure connection with the socket. Additionally, the supplied cord is not suitable for outdoor use and will deteriorate in the sun. Consequently, the product could overheat and catch fire. The product does not comply with the requirements of the Low Voltage Directive.
The supplied plug does not meet dimensional requirements and does not have capacity for a fuse, which is required for safe operation under fault conditions. Moreover, the earth pin of the adaptor is not sufficient. These could cause the adaptor or plug to catch fire or explode, posing a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
The toy contains small parts (the paws) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The battery compartment can easily be opened without use of any tools, making the button batteries inside easily accessible. A child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the General Product Safety Regulation.
The product does not feature adequate safety shutters. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP). These phthalates may harm the health by causing possible damage to the reproductive system. Additionally, the product has an excessive concentration of short chain chlorinated paraffins (SCCPs). SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the REACH Regulation nor with the Persistent Organic Pollutants (POP) Regulation.
The plastic material of the toy has an excessive amount of di-‘isononyl’ phthalate (DINP) (measured value: 23.6% by weight). DINP may harm the health of children by causing possible damage to their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The migration of boron from the toy slime is too high (measured value up to 795 mg/kg). Ingestion or contact with an excessive quantity of boron may harm the health of children by damaging their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-3.
The migration of boron from the toy slime is too high (measured value: up to 668.28 mg/kg). Ingestion or contact with an excessive quantity of boron may harm the health of children by damaging their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the relevant European standard EN 71-3.
Loss of vehicle control increases the risk of a crash.
An overheated wire can ignite flammable material in the cargo area, increasing the risk of fire.
A rearview camera image that does not display can decrease the driver's visibility, increasing the risk of a crash.
A short circuit increases the risk of a fire.
The body panels may separate during a crash, reducing structural integrity and increasing the risk of injury.
The body panels may separate during a crash, reducing structural integrity and increasing the risk of injury.
The recalled bed rails violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. Additionally, the bed rails’ push pins and push pin holes are incorrectly sized, posing a laceration hazard.
The sandals’ decorative pearls can fall off, posing a risk of serious injury or death from a choking hazard.
The recalled tower stools can collapse or tip over while in use, and a child’s torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.
The recalled bed rails violate the mandatory standard for https://protect.hec.checkpoint-gov.com/v2/r08/___https:/www.cpsc.gov/Bu… lang="EN-US">adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. In addition, the bed rails do not bear the required hazard warning labels.
The lighters violate the mandatory safety standard for multipurpose https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">lighters because they do not have the required child-resistant mechanisms posing a risk of serious injury or death from fire and burn hazards. In addition, the lighters failed to meet the pre-market lighter submission requirement needed to demonstrate that the lighters feature child-resistant mechanisms and ensuring their safety and compliance with U.S. regulations.
The recalled sweaters violate the mandatory standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">clothing textiles, posing a risk of serious burn injuries or death.
The regulator inlet tube can crack and break, posing a risk of serious injury or death from drowning.
The cup in the lunch boxes contains high lead concentration levels for drinking vessels, posing a lead poisoning hazard. Lead is toxic if ingested by adults or children and can cause adverse health issues.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… lang="EN-US">STURDY Act.