Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The impact absorption capacity of the helmet is insufficient. In the event of an impact, users may suffer head injuries. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standard EN 1078.
In the event of an impact, the helmet could easily become detached and slip off the head of the user, leaving it exposed to injuries. The product does not comply with the Regulation ECE 22-06.
The product has a protruding part that is too long. Small children may put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Inside the device, some electrical parts (such as components or circuits) are not sufficiently distant from each other. Moreover, the device is missing one of the safety capacitors to prevent electricity leakage between hazardous and accessible parts. Additionally, the cable connecting the device to the electrical socket has a different number of pins between the plug (wall side) and the connector (device side). This may cause a poor connection and increase the risk of overheating or an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The product has aromatic amines. When in direct and prolonged contact with the skin, the aromatic amines may be absorbed by the skin. Aromatic amines can cause cancer, cell mutations and affect reproduction. The product does not comply with the REACH Regulation.
The product contains cannabidiol and delta-9-tetrahydrocannabinol (measured value up to 0.5 and 0. 3% by weight, respectively), which are psychoactive substances that can cause central nervous system disorders. The product does not comply with the Cosmetic Products Regulation.
According to the label, the product contains a psychoactive cannabinoid (Hexahydrozepine). The use of this substance is associated with the risk of mental and behavioural disorders. The product does not comply with the General Product Safety Regulation.
In the event of an impact, the helmet could easily become detached and slip off the head of the user, leaving it exposed to injuries. The product does not comply with the Regulation ECE 22-06.
The strap in front of the ear may slide backwards, which could affect the stability and optimal hold of the helmet on the head during normal use. In case of an accident this may lead to injuries. The product does not comply with the Personal Protective Equipment Regulation.
The structure of the socket allows single-pole insertion of plugs and the protection surface of the plug's face is insufficient. Moreover, the wires can be pulled or twisted out of their terminals and the single-layer insulation is insufficient for a Class II appliance, which could lead to exposed live parts. Finally, the insulation does not ensure adequate separation from live (active) parts during the lifetime of the luminaire. The user could touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2.
According to the label, the product contains a psychoactive cannabinoid (T8HC). The use of this substance is associated with the risk of mental and behavioural disorders. The product does not comply with the General Product Safety Regulation.
The electrical resistance of the shoes is too high (measured value: 7,4x10^9 Ω), which could cause static charge accumulating on the user's body and could damage electronic components next to it. The product does not comply with the Personal Protective Equipment Regulation nor with the European standard EN 20345.
The product resembles a toy; however, there is a risk of drowning if children play with it unsupervised. Floating seats with leg openings must be used under constant adult supervision and must not have any play elements or overwater structures. The product does not meet the requirements of the General Product Safety Regulation nor with the European standard EN 13138.
Due to a mistranslation of the configuration data between two production systems, the vehicle’s body control module (BCM) may not be correctly configured to detect indicator light failures. If an indicator bulb fails, the BCM may not detect the fault and the warning signal may not illuminate, reducing communication with other road users and increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a mistranslation of the configuration data between two production systems, the vehicle’s body control module (BCM) may not be correctly configured to detect indicator light failures. If an indicator bulb fails, the BCM may not detect the fault and the warning signal may not illuminate, reducing communication with other road users and increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The propellant in the driver and front passenger airbags may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a mistranslation of the configuration data between two production systems, the vehicle’s body control module (BCM) may not be correctly configured to detect indicator light failures. If an indicator bulb fails, the BCM may not detect the fault and the warning signal may not illuminate, reducing communication with other road users and increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to a mistranslation of the configuration data between two production systems, the vehicle’s body control module (BCM) may not be correctly configured to detect indicator light failures. If an indicator bulb fails, the BCM may not detect the fault and the warning signal may not illuminate, reducing communication with other road users and increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toy contains small magnets with a high magnetic flux (value up to 50,74 kG²mm²) which can be easily detached. If a child swallows the small magnets, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The driver airbag connectors in the steering column has shown that they may corrode. Over time, the airbag might not deploy as intended and therefore could increase the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
When using the self-feeding bottle, a baby does not have the dexterity or cognitive ability to control the flow of bottle feed, to know when to stop feeding, or to act if they gag or choke or to otherwise signal or raise alarm if something is going wrong. This can lead to choking. The product does not comply with the General Product Safety Regulation.
The solders in the product have an excessive amount of lead (measured value 0.15% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The toy has small parts (the suction cups) that can easily detach. A small child could put them in their mouth and choke. The product does not comply with the requirements of the Toy Safety Directive.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 6.2% and 0.02% by weight, respectively).These phthalates may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the requirements of the Toy Safety Directive.