Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The product lacks sufficient insulation. The user can therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The toy's battery compartment opens easily without tools, making the button batteries inside easily accessible. A small child may put them in the mouth and swallow them, which could cause damage to the child’s gastrointestinal tract and/or choking. The product does not comply with the requirements of the Toy Safety Directive nor with European standard EN 62115.
Due to a structural failure, the handle bar can easily break. This could cause an accident and injuries. The product does not comply with the General Product Safety Regulation nor with the European standards EN ISO 4210.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket The product does not comply with the requirements of the Low Voltage Directive.
The balloons release an excessive amount of nitrosatable substances (measured total value: 2.19 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The toy consists of small magnets with high magnetic flux (measured value up to 2.44 T²mm²). If a child swallows them, they could attract one another causing intestinal blockage or perforation. The product does not comply with the requirements of the Toy Safety Directive.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A defective weld on the ISOFIX bar may break in the event of an accident and increase the risk of injury to children in the child seat attached to it. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket. The product does not comply with the requirements of the Low Voltage Directive.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket. The product does not comply with the requirements of the Low Voltage Directive.
Due to an assembly error the user could receive an electric shock when touching the earth contact of the socket The product does not comply with the requirements of the Low Voltage Directive.
The rate of nickel release is too high (measured value up to 3.0 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH regulation.
The RSW22 starter with reinforced water tightness (RWT) may experience increased abrasion of the magnetic contact, causing deposits to build up at the lowest point inside the relay. These deposits may increase relay contact resistance, leading to starting failures or short circuits. If a short circuit occurs, either when attempting to start the vehicle or while driving due to vibration-related movement of the deposits, it could cause a thermal event and increase the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The child may rotate the toy’s wheel by hand while the toy is upside down on the ground, trapping their finger in the gap between the wheel and the metal part on top. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The balloons release an excessive amount of nitrosatable substances (measured total value: 1.45 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The toy has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 0.448 % by weight). These phthalates may harm the health of children, causing possibly damage to the reproductive system. The product does not comply with the REACH Regulation.
The toy contains small parts (pieces of the paw print) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
A crank may break during lifting of a load, posing a risk of injuries. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 1494.
A screw fastening on the frame of the driver’s seat may detach. In the event of an accident, the screw fastening might not withstand the resulting loads. In this case, the protection offered by the restraint system could be impaired as a result of a change in the seating position. Risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The rate of nickel release is too high (measured value up to 1.8 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening, and therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
A screw fastening on the driver’s seat frame may detach. In the event of an accident, the fastening may not withstand the resulting loads, which could impair the protection provided by the restraint system and increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The ball joints on the tie rods may not have been heat-treated according to specifications, impairing the steering performance. This could reduce vehicle control and increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.