Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The recalled mattresses violate the mandatory flammability standard for mattresses, posing a risk of serious injury or death from fire.
During assembly or disassembly, the frame of the wall bed can fall onto consumers, posing deadly impact, crush and laceration hazards.
The recalled youth ATVs violate the mandatory safety standard for ATVs because the parking brakes fail to hold and the ATV's speed limiting device is not set to the restricted speed required for children ages six (6) and older, posing a crash hazard. Additionally, the ATVs are missing the required rear safety reflectors, reducing visibility of the youth ATV to other vehicles, posing a deadly crash hazard.
The recalled pressure washers lack an integral ground-fault circuit-interrupter (GFCI) and, because the power cord is short, it may encourage use of an extension cord, posing serious risks of injury or death from shock and electrocution hazards.
The recalled fuel containers violate the requirement for closures under the Children's Gasoline Burn Prevention Act. The closure is not child-resistant, posing a risk of burns and poisoning to children.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standards as required by the STURDY Act.
The recalled toys violate the small parts ban because they are intended for children under three years old and the wooden beads pose a deadly choking hazard to young children.
The baby jumper, baby swing and 2-in-1 baby jumper & swing can become unstable, posing fall and impact hazards. Additionally, the hanging restraint straps and seat openings can pose strangulation hazards.
Use of the fire pits can result in uncontrolled pool fires where flames burn across the surface of pooled or spilled alcohol, as well as flame jetting from fuel containers, resulting in serious or fatal burns.
The recalled magnetic building cubes contain magnets that can become loose if the cubes break or open, posing a magnet ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.
The recalled minifridges' electrical switch can short circuit, posing fire and burn hazards.
Marker lights that fail to illuminate can reduce visibility, increasing the risk of a crash.
Marker lights that fail to illuminate can reduce visibility, increasing the risk of a crash.
Battery failure can also increase the risk of a fire.
An incorrectly attached steering spindle can lead to a loss of steering control, increasing the risk of a crash.
An unexpected loss of drive power can increase the risk of a crash. In addition, a damaged driveshaft can result in a vehicle rollaway if the parking brake is not applied, increasing the risk of a crash or injury.
Air bags that do not deploy as intended increase the risk of injury in a crash.
An electrical short can cause a disruption to safety functions such as a loss of rear lighting or instrument panel warning lights, increasing the risk of a crash.
An electrical short can cause a disruption to safety functions such as a loss of rear lighting or instrument panel warning lights, increasing the risk of a crash.
A loss of exterior lights can reduce the visibility of the vehicle to other drivers, increasing the risk of a crash. Inoperative equipment can delay emergency response, increasing the risk of injury.
During a crash, an incompatible fuel tank cage and fuel system may result in a fuel leak, increasing the risk of a fire.
During a crash, an incompatible fuel tank cage and fuel system may result in a fuel leak, increasing the risk of a fire.
The product contains perfluorononyl dimethicone, which is a perfluorooctanoic acid (PFOA) related compound. PFOAs pose a risk to human health and the environment. The product does not comply with the Persistent Organic Pollutants (POP) Regulation and the REACH Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values up to 1.4% and 0.7 by weight, respectively). These phthalates may pose a risk to human health and the environment. Additionally, the solders in the product have an excessive concentration of lead. (measured value up to 80% by weight). and of short chain chlorinated paraffins (SCCPs) ((measured value up to 1% by weight). Lead poses a risk to the environment. SCCPs persist in the environment, are toxic to aquatic organisms at low concentrations and bio-accumulate in wildlife and humans, posing a risk to human health and the environment. The product does not comply with the Persistent Organic Pollutants (POP) Regulation nor with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).