Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The solders in the product have an excessive concentration of lead (measured value: 68.9% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive).
The toy has small parts (eyes) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The bolts on the rear brake drums are not tightened to the specified torque. This may cause brake fluid leakage and/or brake or wheel jamming, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The 48V wiring harness is not connected in accordance with specifications. This may lead to a build-up of heat resulting in a fire. Protection against contact is not guaranteed, which increases the risk of electric shock. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The solders in the product have an excessive concentration of lead (measured value up to 64.9% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
Incorrect wheel bolts have been fitted and may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The wicks of the candle can re-ignite after the candles are extinguished, which can lead to a fire. The product does not comply with the General Product Safety Regulation nor with the European standard EN 15493.
The solders in the product have an excessive concentration of lead (measured value up to 53.4% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The fireworks may burst or release burning material outside the safety distance of 8 m or below a height of 3 m, causing damage to sight. Moreover, the article does not have full function, posing a risk of the user trying to reignite the product leading to burns and damage to sight. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
The wheel bolts may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The bulb’s diffuser can easily detach, exposing live parts. The user can touch these live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 62560.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl)propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The rubber of the balloons releases an excessive amount of nitrosatable substances (NDMA and NDEA, total measured value: 1.7 mg/kg). These nitrosamines may cause cancer through ingestion or dermal exposure. A child could be exposed to it when touching or putting the product in the mouth. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The rain shield on the factory-fitted awning may detach from the roof of the vehicle and fall onto the road, posing a risk of accident and injury to the traffic behind. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product contains small parts (the red wheels) and the fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may put the filling material and/or the small parts in the mouth and choke. Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 20.35% by weight).This phthalate may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation, the requirements set out in the Toy Safety Directive nor with European standard EN 71-1.
The toy has small parts (eyes) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
Protruding rear swing door strikers may cause head injuries when users enter or exit the rear of the vehicle, such as during loading or unloading. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The product contains small parts (metal rings, hands and feet, plastic stone in the hair slide, decorative plastic flower) that can easily detach. A small child may put them in the mouth and choke. Additionally, the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and diisooctyl phthalate (DIOP) (measured value up to 14.5% by weight, combined). These phthalates may harm the health of children, possibly causing damage to the reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation and the European standard EN 71-1.
There is no information on the minimum load for automatic brake closure. This means loads could drop unexpectedly during use, causing serious injuries to users. The product does not comply with the requirements of the Machinery Directive.
The product has small parts which can easily detach (dog's nose). A small child could put them into the mouth and choke. Moreover, there are no warnings to indicate that the product is supplied with a cord, which may present a strangulation hazard to young children if left unattended. The product does not comply with the requirements of the Toy Safety Directive.
The bolts or rivets attaching the chains to the flail-cutter could break. The chains might consequently detach during use and hit the user causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
The rivets attaching the knives to the flail-cutter’s main body could break. The knives might consequently detach during use and hit the user, causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
Handlebars were incorrectly fitted, therefore, the holes for the integrated cabling may work incorrectly, leading to the breakage of the handlebar. This could cause injuries and cuts to the user. The product does not comply with the General Product Safety Regulation.
The rivets attaching the knives to the flail-cutter’s main body could break. The knives might consequently detach during use and hit the user, causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.