The Heil Co. recall 26V535: EQUIPMENT
A damaged CNG tank can leak fuel, increasing the risk of a fire.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
A damaged CNG tank can leak fuel, increasing the risk of a fire.
A loss of throttle control increases the risk of a crash.
A loss of exterior lights can reduce the visibility of the vehicle to other drivers, increasing the risk of a crash. Inoperative equipment can delay emergency response, increasing the risk of injury.
The balloons release an excessive amount of nitrosatable substances (measured total value: 2.2 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
Intensive use may lead to the formation of a crack at the junction of the frame and the stem. This defect could cause this junction to break, resulting in a risk of the user falling, leading to injuries. The product does not comply with the requirements of the Machinery Directive.
The product has an excessive concentration of cadmium (measured value up to 19% by weight). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. The product does not comply with the REACH Regulation.
The plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value: 20% by weight). This phthalate may harm the health by causing possible damage to the reproductive system. The product does not comply with the REACH Regulation.
The balloons release an excessive amount of nitrosatable substances (measured total value: 2.06 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The toys' ears are too long. They could entangle around the neck of the child and create a risk of strangulation. Moreover, the fibrous stuffing material of the toy is easily accessible due to the weakness of the seams. A small child may put the filling material in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, the product offers no protection against electric shock if a Class I appliance is connected to this extension cord. The user could therefore touch accessible, live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor the European standards EN 60884-1 and EN 60884-2.
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, users may receive an electric shock if a Class I appliance is connected to this extension cord. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60884-1 and EN 60884-2.
The solders in the product have an excessive concentration of cadmium and lead. (measured value: up to 0.42% and 0.23% by weight, respectively). Cadmium bio-accumulates and poses a risk to the environment.Lead poses a risk to the environment. Moreover, the plastic material of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 3.3 % and 5.1% by weight, respectively). These phthalates may pose a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, users may receive an electric shock if a Class I appliance is connected to this extension cord. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60884-1 and EN 60884-2.
The product has a design flaw that allows the plug of a Class I appliance to be inserted into the socket of an extension cord intended for Class II appliances. Consequently, users may receive an electric shock if a Class I appliance is connected to this extension cord. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60884-1 and EN 60884-2.
The rate of nickel release is too high (measured value up to 2 µg/cm2/week). Nickel is a strong sensitiser and causes allergic reactions if present in articles that come into direct and prolonged contact with the skin. The product does not comply with the REACH Regulation.
The product is highly flammable but lacks a tactile warning of danger. Partially sighted persons are not informed that it is a dangerous product. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The rivets attaching the knives to the flail-cutter’s main body could break. The knives might consequently detach during use and hit the user, causing injuries. The product does not comply with the requirements of the Machinery Directive nor with the Commission Decision 2012/32/EU prohibiting the placing on the market of flail-type cutting attachments for portable hand-held brush cutters.
The balloons release an excessive amount of nitrosatable substances (measured total value: 0.28 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The creepage distances between the primary and secondary circuits are inadequate. The user could therefore touch accessible live parts and receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive nor with the European standard EN 60335-1.
The toy contains small parts (bristles of the brush) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product presents a serious risk of injuries as it is supplied with an attachable canopy. In windy conditions, the canopy could cause the product to lift from the water. The child could fall from the product and be injured by impact or by drowning in the water. The product does not comply with the General Product Safety Regulation.
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment (PPE) Regulation nor with the European standards EN 12312-2 and EN 18526-2.
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment Regulation nor with the European standards EN 12312-2 and EN 18526-2.
The toy contains small parts (collar) that may easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.