Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The tightening of the ball joint nuts of the front lower control arm may be insufficient due to a processing defect. The first signs thereof are an abnormal noise (clicking and/or knocking sounds) detected at low mileage. One of the connections between the wheel and the frame of the vehicle may be lost, which could cause the vehicle to veer off course, leading to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The solders in the product have an excessive concentration of lead (measured value up to 33.5% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive).
The product has an excessive amount of dichloromethane. Dichloromethane affects the central nervous system, can impair the neuro-development and behaviour of the unborn child and might cause cancer when inhaled. The product does not comply with the REACH Regulation.
The toy has small parts (eyes and nose) that can easily detach. A small child may put them in the mouth and choke. Moreover, the fibrous stuffing material of the toy is easily accessible. A small child could put it in the mouth and choke. Additionally, the suction cup of the product has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) and dibutyl phthalate (DBP) (measured values: 16% and 11% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation and the European standard EN 71-1.
The product has an excessive amount of dichloromethane. Dichloromethane affects the central nervous system, can impair the neuro-development and behaviour of the unborn child and might cause cancer when inhaled. The product does not comply with the REACH Regulation.
According to the list of ingredients, the product contains 2-(4-tert-butylbenzyl) propionaldehyde (BMHCA), which is prohibited in cosmetic products. BMHCA may harm the reproductive system, may harm the health of the unborn child and may cause skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
A cracked wheel can cause a loss of vehicle control, increasing the risk of a crash.
A detached hinge cover can become a road hazard for other vehicles, increasing the risk of a crash.
A damaged fuel line may leak, increasing the risk of a fire.
A damaged seat belt or unsecured seat back may not adequately restrain the seat occupant, increasing the risk of 135/2,000 Safety Risk: Crash Fire Death Injury Consumer Advisories: Do Not Drive Park Outside Remedy Description:injury during a crash.
Reduced capacity may cause the cable to overheat, increasing the risk of a fire.
A detached screw may lodge between the frame and stem, interfering with steering and increasing the risk of a crash or injury.
The rivets used to support the swing seat can fail, posing a fall hazard to children.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory standard as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… Act.
The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risks of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… Act.
The recalled helmets violate the mandatory safety standard for https://www.cpsc.gov/Business--Manufacturing/Business-Education/Busines… helmets because the helmets do not comply with the impact attenuation, positional stability, labeling and certification requirements. The helmets can fail to protect the user in the event of a crash, posing a serious risk of injury or death due to head injury.
The recalled magnet games violate the https://www.ecfr.gov/current/title-16/chapter-II/subchapter-B/part-1250… lang="EN-US">mandatory standard for toys because they contain loose high-powered magnets that fit within CPSC’s small parts cylinder, posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.
An audible warning chime that does not properly alert of an unbelted seat belt can increase the risk of injury during a crash.
Loss of the rear ABS system can increase the risk of a crash.
An open circuit may draw a higher current and increase the risk of a fire.
Starting the vehicle while in gear may cause unexpected vehicle movement, increasing the risk of a crash or injury.
Exhaust fumes inside the cabin increase the risk of injury or death from carbon monoxide poisoning.
A door that cannot be opened may trap occupants inside the vehicle, which can increase the risk of injury.