Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
The product has small parts (key chain, nosepiece, beads of the necklace) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The toy has an excessive concentration of dibutyl phthalate (DBP) and bis(2-ethylhexyl) phthalate (DEHP) (measured values: 0.16% and 0.16% by weight, respectively). These phthalates may harm the health of children, causing possible damage to their reproductive system.Moreover, the toy has an excessive concentration of di-‘isononyl’ phthalate (DINP) (measured value: 0.37% by weight).This phthalate may harm the health of children, causing possible damage to their reproductive system and liver. The product does not comply with the requirements of the Toy Safety Directive nor with the REACH Regulation.
The solders of the product have an excessive concentration of lead (measured value up to 46% by weight).Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
The integrated battery may overheat, which could lead to a fire. The product does not comply with the requirements of the Low Voltage Directive.
The solders in the product have an excessive concentration of lead (measured value up to 83% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive).
The solders in the product have an excessive concentration of lead (measured value up to 91% by weight). Lead poses a risk to the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive).
The nipple of the soother could break, potentially generating small parts that could pose a choking hazard to the child. The product does not comply with the General Product Safety Regulation nor with the European standard EN 1400.
The product contains cyanoacrylates that can bond skin and eyes in seconds. The product however does not display the required warnings and hazard labels and lacks child-resistant fastening. Therefore users are not properly informed about the dangers incurred when the product comes into contact with the skin and eyes. The product does not comply with the Regulation on classification, labelling and packaging of substances and mixtures (CLP).
The heat transfer fluid‘s auto-ignition temperature of the solar collector is too low. Under high outside temperatures if a leak develops, allowing sufficient fluid to escape, a fire may develop. The risk is caused exclusively by specific heat transfer fluids. The product does not comply with the Construction Products Regulation.
High levels of C9–C14 Perfluoroalkyl carboxylic acids were found in the outer fabric of the product. These chemicals are very difficult to break down, can spread through the environment and may build up over time. Their release from products can contribute to long-lasting and potentially irreversible pollution, posing a serious risk to the environment. The product does not comply with the REACH Regulation.
High levels of C9–C14 Perfluoroalkyl carboxylic acids were found in the outer fabric of the product. These chemicals are very difficult to break down, can spread through the environment and may build up over time. Their release from products can contribute to long-lasting and potentially irreversible pollution, posing a serious risk to the environment. The product does not comply with the REACH Regulation.
The migration of chromium VI from the textile labels is too high (measured value up to 8.9 mg/kg). Chromium (VI) is sensitising, can trigger allergic reactions and can cause cancer. The product does not comply with the REACH Regulation.
The fireworks may burst or release burning material over an extended period of time after functioning. The user might reignite the product, which may result in the user being hit by the pyrotechnical effects and matter from the product. This can lead to injuries, burns and damage to sight. The user may bring the product inside and it may release burning material in the building. Consequently, this poses a risk of asphyxiation. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947-5.
The balloons release an excessive amount of nitrosatable substances (measured total value: 0.13 mg/kg). Nitrosatable substances can be absorbed through the skin and mouth while playing and generate nitrosamines. Nitrosamines may cause cancer. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-12.
The filter transmittance is below the minimum usable level, the view may appear completely dark. Users may then remove or lift the glasses to locate the sun, exposing their eyes directly to solar radiation and creating a risk of damage to sight. The product does not comply with the Personal Protective Equipment Regulation nor with the European standard EN 12312-2 and EN 18526-2.
The plug does not meet the dimensional requirements. The distance between the outer edge of the plug and the live pin is insufficient, and the earth and live pins are too short. As a result, the plug may not connect securely to a socket, potentially exposing live parts to the user. Moreover, the plug also does not have the capacity for a fuse, which is required to ensure the safe operation of the product under fault conditions. Users may receive an electric shock. The product does not comply with the requirements of the Low Voltage Directive.
The gate of the carabiner can malfunction and may not close automatically. This creates a risk of unintended detachment during use, which could result in a fall from height. This product does not comply with Personal Protective Equipment (PPE) Regulation.
The affected batches may emit feedback noise (measured value up to 106 dBA) through the headset speakers, leading to damage to hearing.The likelihood of occurrence of this issue can be increased in cold ambient temperatures and with a depleted battery state. The product does not comply with the Personal Protective Equipment Regulation.
The sleeving of the power supply cable may become damaged during use, which could expose live parts. The user could touch it and receive an electric shock. Moreover, the damage could also cause the product to overheat and melt, creating a risk of fire. The product does not comply with the requirements of the Low Voltage Directive.
Due to incorrect software calibration, the lithium-ion battery controller may not reliably detect battery cell anomalies. It may incorrectly identify faults because of electrical interference or fluctuations in circuit resistance. As a result, the system may switch to fail-safe mode while the vehicle is being driven, limiting engine power and preventing charging. Under certain conditions, this could turn off the main relay and cause a loss of propulsion, meaning the vehicle may come to a stop while in motion, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The toys have small parts (beaks and hands) that can easily detach. Small children may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1.
The product has long drawstrings with free ends at the level of the neck. These drawstrings can become trapped during various activities of a child, leading to strangulation. The product does not comply with the General Product Safety Regulation nor with the European standard EN 14682.
A joint on the pyrotechnic gas generator in the front seat belt pretensioners may not have been properly welded. In the event of an accident, small parts could detach, increasing the risk of injury to passengers. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
A fault in the fuel supply control unit may prevent the vehicle from correctly switching between the main and auxiliary fuel tanks. This could cause a loss of engine power while driving or lead to fuel spilling onto the road, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.