Corp. Micro Bird, Inc. recall 26V149: EQUIPMENT ADAPTIVE/MOBILITY:WHEELCHAIR RESTRAINTS/SECUREMENT:LATCH/ANCHOR:
An unsecured wheelchair can move during transit or a crash, increasing the risk of injury.
Official monitoring feed
Search published CPSC, EU Safety Gate and NHTSA notices. Each result includes the official source, publication date, hazard and next action.
Filtered feed
An unsecured wheelchair can move during transit or a crash, increasing the risk of injury.
An incorrect pressure rating may lead to underinflated tires, increasing the risk of a tire blowout or a crash.
Unintended acceleration or deceleration can increase the risk of a crash.
The toy contains small parts (rings) that can easily detach. A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1
The product is not protected against moisture. Consequently, water could penetrate the product and create a short circuit, which could lead to a fire. The product does not comply with the requirements of the Low Voltage Directive.
The product contains small parts (the shapes). A small child may put them in the mouth and choke. The product does not comply with the requirements of the Toy Safety Directive nor with the European standard EN 71-1
The plug fuse may fail to operate, leading to the plug overheating and/or exploding, which can cause a fire. Moreover, the fails to cut off under restricted airflow testing, which leads to the emission of excessive amounts of smoke and interior components may melt. This product does not comply with the requirements of the Low Voltage Directive.
During use, the thermostat in the appliance may short-circuit, producing dangerous amounts of flames and smoke. The user may try to extinguish the fire. They may sustain burns if their clothes catch fire. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60335-1 and 60335-2-15.
The base of the ceramic cup may crack or break unexpectedly during normal use, particularly when filled with hot liquids. The breakage may cause hot liquid to spill, increasing the risk of burns. The product does not comply with the General Product Safety Regulation.
The mains cable can be connected to the pump in reverse, allowing the live pin to connect to the earth pin causing live parts to become accessible. The user could touch these accessible live parts and receive an electric shock. The product does not meet the requirements of the Low Voltage Directive.
The supplied USB cable cannot handle outputs from standard USB power sources. This means it may melt when it is used to charge the product, and cause burn injuries to the user. The product does not comply with the requirements of the Radio Equipment Directive (RED).
The toy contains small parts (disintegrating straw pieces) that can easily detach. A small child may put them in the mouth and choke. This product does not comply with the General Product Safety Regulation.
The material that the balloons are made releases an excessive amount of nitrosatable substances and nitrosamines (measured values: 4.9 mg/kg and 0.7 mg/kg, respectively). Nitrosamines can cause cancer if swallowed or through skin contact. A child could be exposed to them if they touch the product or put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive.
The product lacks appropriate instructions for safe use and the necessary labelling. Moreover, the product contains linalool, but its presence is not indicated in the list of ingredients. Consumers are not aware of their presence, and may suffer allergic reactions or skin sensitisation. The product does not comply with the Cosmetic Products Regulation.
The laser beam is too powerful and not adequately enclosed. Direct viewing of the laser beam could cause damage to sight. The product does not comply with the requirements of the Machinery Directive.
The product contains asbestos fibres. Asbestos causes cancer. The product does not comply with the requirements of the Toy Safety Directive.
Because the safety mechanisms are easily bypassed, and because of the lack of a base plate, direct access to laser radiation during operation is possible. Looking directly into the laser beam or exposure via scattered radiation could damage a person’s sight. The product does not comply with the requirements of the Machinery Directive nor with the European standard EN 60825-1.
The rubber of the balloons releases an excessive amount of nitrosatable substances and nitrosamines (measured values up to 4.2 mg/kg and 0.06 mg/kg, respectively). Nitrosamines can cause cancer if swallowed or through skin contact. A child could be exposed to them if they touch the product or put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive.
Incomplete engagement of the wiring harness clip may cause the engine to stall while driving, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
The plastic material of the product contains an excessive amount of dibutyl phthalate (DBP) (measured value up to 36.3% by weight).This phthalate may harm the health of children, causing possible damage to their reproductive system. The product does not comply with the REACH Regulation.
The material of the black padding in the product has an excessive concentration of polycyclic aromatic hydrocarbons (PAHs), notably benzo[a]pyrene, benzo[e]pyrene, benzo[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene and dibenzo[a,h]anthracene (measured values: 49.5 mg/kg, 76.6 mg/kg, 143 mg/kg, 204 mg/kg, 30.2 mg/kg, 9.1 mg/kg, 7.3 mg/kg and 2.9 mg/kg by weight, respectively). These PAHs may cause cancer and are also mutagenic and toxic for reproduction. The product does not comply with the REACH Regulation.
The material of which the balloons are made releases an excessive amount of nitrosatable substances and nitrosamines (measured values: 5.6 mg/kg and 0.1 mg/kg, respectively). Nitrosamines can cause cancer if swallowed or through skin contact. A child could be exposed to them if they touch the product or put it in their mouth. The product does not comply with the requirements of the Toy Safety Directive.
The product has an excessive concentration of cadmium and lead (measured values: 42% and 0.25% by weight, respectively). Cadmium is harmful to human health because it accumulates in the body, can damage the kidneys and bones and it may cause cancer. Lead is harmful to human health, accumulates in the body, can cause developmental neurotoxicity and may also affect breast-fed or unborn children. The product does not comply with the REACH Regulation.
The article has too many duds with and without fuse. Users can ignite them causing injuries and/or burns. Moreover, the fireworks may burst or release burning material outside the safety distance of 8 m or below a height of 3 m, which can cause injuries and/or burns to the user or bystanders or could cause a fire. In addition, the article does not extinguish after functioning within 120 seconds, which may cause fire to surrounding objects. The product does not comply with the requirements of the Pyrotechnics Directive nor with the European standard EN 15947.