Results are official records from named sources. Coverage is incomplete. This site is not medical advice and does not publish drug labels, openFDA, Prop 65 or NIH DSLD records.
No Wikidata QID is asserted for this brand in the current slice.
What the governed recall projection contains
This page groups 3 official recall actions that explicitly name VERK GROUP. They come from safety-gate (3).
The published dates in this group run from 2026-01-16 to 2026-08-14. The projection was retrieved 2026-09-04T21:09:13.297Z; dates describe the notices, not whether every affected unit has been repaired.
3 distinct published hazard statements are represented. Open each action for its hazard, remedy, jurisdiction, native identifier and official source link. Similar brand names are not merged unless the source record names the brand.
The solders in the flashlight have an excessive concentration of lead (measured value up to 84% by weight). In addition, the plastic material in the survival tool case has an excessive concentration of bis(2-ethylhexyl) phthalate (DEHP) (measured value up to 13.7% by weight). Lead poses a risk to the environment. DEHP poses a risk to human health and the environment. The product does not comply with the requirements of the Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS 2 Directive).
Published remedy: Type of economic operator taking notified measure(s): DistributorCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 26/09/2025Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: 26/09/2025
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock to the user. Moreover, the product has an inadequate conductor cross-sectional area, insufficient cable length between the plug and the first socket, and a design flaw allowing the plug to be inserted in a single-pole manner. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Published remedy: Type of economic operator to whom the measure(s) were ordered: DistributorCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: UnknownType of economic operator to whom the measure(s) were ordered: DistributorCategory of measure(s): Recall of the product from end usersDate of entry into force: UnknownType of economic operator to whom the measure(s) were ordered: DistributorCategory of measure(s): Warning consumers of the risksDate of entry into force: Unknown
Due to the insufficient mechanical strength of the product, live parts are accessible, which could result in electric shock. Moreover, the product has an insufficient conductor cross-sectional area and inadequate design, where the extension socket allows for single-pole insertion of the plug. The product does not comply with the requirements of the Low Voltage Directive nor with the European standards EN 60598-1 and EN 60598-2-20.
Published remedy: Type of economic operator to whom the measure(s) were ordered: DistributorCategory of measure(s): Withdrawal of the product from the marketDate of entry into force: UnknownType of economic operator to whom the measure(s) were ordered: DistributorCategory of measure(s): Recall of the product from end usersDate of entry into force: UnknownType of economic operator to whom the measure(s) were ordered: DistributorCategory of measure(s): Warning consumers of the risksDate of entry into force: Unknown