Results are official records from named sources. Coverage is incomplete. This site is not medical advice and does not publish drug labels, openFDA, Prop 65 or NIH DSLD records.
No Wikidata QID is asserted for this brand in the current slice.
What the governed recall projection contains
This page groups 14 official recall actions that explicitly name Peugeot. They come from safety-gate (14).
The published dates in this group run from 2026-01-23 to 2026-07-17. The projection was retrieved 2026-09-04T21:09:13.297Z; dates describe the notices, not whether every affected unit has been repaired.
14 distinct published hazard statements are represented. Open each action for its hazard, remedy, jurisdiction, native identifier and official source link. Similar brand names are not merged unless the source record names the brand.
Incorrect wheel bolts have been fitted and may loosen or detach, resulting in wheel detachment and increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 22/12/2025
Vehicles fitted with a DV5R engine may experience a fuel leak. The non-conformity of the round shape on the cone of the common rail may cause the nut to loosen, resulting in the possibility of fuel leaking between the nut and the thread, leading to fuel vapours and fuel flow into the hot exhaust system. This may lead to a fire under the bonnet. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 21/01/2026
The wheel nuts are not securely tightened, which could result in the wheel nut coming loose while the vehicle is in motion, or the loss of a wheel. This could result in an accident and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 30/01/2026
There is an insufficient connection between the fuel return pipe and the valve which could lead to a fuel leak. The possibility of fuel coming into contact with hot parts cannot be ruled out, which could cause the vehicle to catch fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 30/01/2026
The vehicle may have contact, or insufficient clearance (< 10 mm), between the petrol particulate filter pipe and the terminal protection cap of the 48 V belt starter generator. In wet conditions, the insufficient clearance and possible contact between these components can lead to water infiltration, causing an electric arc, that could trigger a thermal event, such as overheating, which may lead to fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 09/03/2026
The DV5R engine may experience a loss of power due to slippage of the water pump pulley. This slippage can cause misalignment of the timing belt, potentially resulting in engine shutdown. The sprocket of the water pump pulley may detach from the shaft, which can lead to the loss of parts on the road and increase the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 11/03/2026
Vehicles without a bulkhead were manufactured and supplied with a single instead of a double seatback. There is a risk of excessive movement of the seatback in the event of a rear-end collision, which could result in the driver being thrown out and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): OtherCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
In vehicles fitted with a DV5 diesel engine, the NOx sensor may not have been properly tightened during installation. This may allow exhaust gases to enter the engine compartment and could result in visible exhaust fumes around the engine area, overheating of nearby components, a risk of fire and increased NOx emissions. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
Vehicles may be fitted with cylinder blocks which are missing a cooling nozzle. If a cooling nozzle is missing, the piston may not be cooled down sufficiently, potentially causing it to weaken, warp or break. This could lead to sudden engine failure, causing power transmission loss. This could also trigger thermal runaway leading to fire and injuries of the passengers. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 13/04/2026
Due to a defect of the engine control unit (inverter) in the vehicles fitted with electric double clutch transmission (e-DCT), metallic soldering residues may cause an internal electric short-circuits. This could lead to continuous power supply and overheating due to a blocked relay and cause a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 27/04/2026
The upper bolts on the lower suspension arm may not have been tightened correctly. This could cause the arm to loosen, creating a clicking noise at the front and potentially leading to loss of vehicle control, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 19/05/2026
The starter body may contact the battery’s positive cable due to insufficient cable protection. This could cause an electric arc or short circuit, leading to smoke from the engine compartment and a fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 26/05/2026
Interior door handles may deactivate when the key is in engine-running mode, which could prevent occupants from exiting the vehicle, potentially leading to injury in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 01/06/2026
Due to a mistranslation of the configuration data between two production systems, the vehicle’s body control module (BCM) may not be correctly configured to detect indicator light failures. If an indicator bulb fails, the BCM may not detect the fault and the warning signal may not illuminate, reducing communication with other road users and increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 01/07/2026