Results are official records from named sources. Coverage is incomplete. This site is not medical advice and does not publish drug labels, openFDA, Prop 65 or NIH DSLD records.
No Wikidata QID is asserted for this brand in the current slice.
What the governed recall projection contains
This page groups 18 official recall actions that explicitly name Ford. They come from safety-gate (18).
The published dates in this group run from 2026-01-16 to 2026-08-21. The projection was retrieved 2026-09-04T21:09:13.297Z; dates describe the notices, not whether every affected unit has been repaired.
18 distinct published hazard statements are represented. Open each action for its hazard, remedy, jurisdiction, native identifier and official source link. Similar brand names are not merged unless the source record names the brand.
The chemical substances in the inflators of the TAKATA NADI airbags may deteriorate over time, particularly in warm, humid climates. This could cause the airbag to rupture with too much force in the event of an accident, which could lead to serious or even fatal injuries in the worst-case scenario. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 16/12/2025Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Request to stop drivingDate of entry into force: 16/12/2025
Leakage from the fuel rail may cause fuel to be released, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
The bolts on the rear brake drums are not tightened to the specified torque. This may cause brake fluid leakage and/or brake or wheel jamming, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
Corrosion of the front seatbelt pretensioner cable may cause it to weaken or break, reducing seatbelt effectiveness and increasing the risk of injury in a crash. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): OtherCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
Incorrectly tightened fastener screws may loosen or fail, which can affect vehicle handling, braking, steering control, or wheel guidance, increasing the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
Gas may be released from the 12V battery into the vehicle cabin area. Inhalation of the released gas may cause adverse health effects to the cabin occupants and cause an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
The driver-side airbag inflator could rupture during deployment and not fully inflate. In addition, the release of high-pressured gas may propel pieces of the inflator and airbag module into the occupant compartment. This could increase the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 15/07/2025
There may be a loss of power brake assistance, increased pedal travel and extended braking distance leading to a risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
The weld seam on the seat frame is defective. In the event of an accident, a defective weld seam may result in insufficient restraining effect of the seatbelt, increasing the risk of injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
Insufficient distance between the wiring harness and the transmission housing may result in damage to cables. The power-assisted steering may fail. There is a risk of fire due to short circuits and a risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
An internal short circuit may occur in the cells of the high-voltage battery which can lead to a fire. In addition, a loss of propulsion power may occur, increasing the risk of accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
An insufficiently screwed-on brake caliper bracket can lead to brake failure. The brake caliper may become detached from the axle due to insufficient tightening torque of the rear brake caliper mounting screws. This could lead to damage to or breakage of the brake hose, resulting in a sudden leak of brake fluid and reduced braking performance. The low brake fluid level warning indicator lights up, accompanied by a corresponding indication in the instrument cluster. This may lead to accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ImporterCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
The rear axle joints may not have been tightened to the required torque during assembly. If an affected joint comes loose completely, the driver may notice a misalignment of the steering wheel when driving straight. In severe cases, the joint may fail without warning, resulting in a rear wheel losing directional control. Although the brakes remain functional, this instability could increase the risk of accidents. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 17/04/2026
The handbrake may slip, causing a complete loss of holding power. This could allow the vehicle to roll away unintentionally, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 22/05/2026
A front suspension bolt may have been overtightened during manufacturing, weakening it over time. If the bolt breaks, steering control and braking performance may be reduced, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: Unknown
A defective valve assembly may lead to noises, a loss of power and/or propulsion failures (damage to the engine). Further damage may lead to an oil leak. This may lead to accidents and injuries. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): OtherCategory of measure(s): Recall of the product from end usersDate of entry into force: 22/06/2026
During installation of the high-security locks, metal shavings from the B-pillar may have damaged the seatbelt. This could reduce the restraining effectiveness of the seatbelt in the event of an accident, increasing the risk of injury. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 10/07/2026
Cracks in the fuel line could lead to a fuel leak above the exhaust after-treatment systems. If the leaking fuel comes into contact with hot components, it could ignite and cause a vehicle fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.
Published remedy: Type of economic operator taking notified measure(s): ManufacturerCategory of measure(s): Recall of the product from end usersDate of entry into force: 10/08/2026